1n Wireless PCI Adapter User Guide
11n Wireless PCI Adapter User Guide Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product trademarks names or mentioned registered herein trademarks are of the their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda Technology Co.
11n Wireless PCI Adapter User Guide Table of Content Chapter 1 Introduction ........................................1 1.1 Product Feature ......................................................... 2 1.2 Product Deployment ................................................ 3 1.3 Package Contents ..................................................... 4 Chapter 2 Installation Guide.................................5 3.1 Station Mode............................................................. 11 3.1.
11n Wireless PCI Adapter User Guide Chapter 1 Introduction W302P employs the most advanced wireless networking technology, IEEE802.11n (Draft 2.0). By using the reflection signal, 802.11n's “Multiple In, Multiple Out” (MISO) technology increases the range and reduces “dead spots” in the wireless coverage area. Unlike ordinary wireless networking of 802.
11n Wireless PCI Adapter User Guide 1.1 Product Feature • Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.
11n Wireless PCI Adapter User Guide • Supports WMM to make your voice and video more smooth • Supports Windows XP, 2000 operating systems, etc. 1.2 Product Deployment W302P Wireless PCI Adapter offers fast, reliable and cost-effective solution for wireless access.
11n Wireless PCI Adapter User Guide objective building, including places of great interests, rent places or places for short-term usage; • Company or individual who avoids using expensive cables, renting cables or renting rights for access. 1.
11n Wireless PCI Adapter User Guide Chapter 2 Installation Guide This chapter is to assist you how to use included the CD-ROM which comprises the Setup Wizard and the Client Utility Interface. The following steps on Setup Wizard are taken the Windows XP as example. 1. Please insert the Wireless PCI Adapter into the PCI interface of your computer. 2.
11n Wireless PCI Adapter User Guide “Next” to install by manual. 3. Inert the included CD-ROM into the CD-ROM drive of your computer, and the Welcome screen appears. (If not appear, “Setup.exe” icon.
11n Wireless PCI Adapter User Guide 4. Click “Enter”. 5. Click “Next” to start installing.
n Wireless PCI Adapter User Guide 6. Click “Change…” to select the directory path, or click “Next”. 7. Select “OK” and “Next” in the following window.
11n Wireless PCI Adapter User Guide 8. During the installation, the following dialogue maybe appears. Click the “Continue Anyway” to continue. There is no security threat to your computer. 9. Click “Finish” to complete the installation.
11n Wireless PCI Adapter User Guide Chapter 3 Client Utility Interface This software is for the W302P Wireless PCI Adapter management. If it does not appear, select “Start”—“All Programs” —“TENDA”—“W302P”, or click the shortcut on your PC’s desktop. Note: In the Windows XP, you can select the included W302P Client Utility Interface or the Windows XP internal wireless application to configure the device. There are two client utility applications in W302P: Station Mode and AP Mode.
11n Wireless PCI Adapter User Guide 3.1 3.1.1 Station Mode Station Mode Topology In this mode, W302P serves as a client to receive the wireless signals to access the Internet.
11n Wireless PCI Adapter User Guide 3.1.2 Status In the Network Status window, it displays something on wireless adapter and wireless network status, including SSID, Authentication type, Encryption Type, IP address, subnet mask and gateway and so on.
11n Wireless PCI Adapter User Guide 3.1.3 Site Survey The Site Survey is used to scan the available wireless network around, showing the wireless network’s signal strength and other information which provides basis for you to access which wireless network. Connect: select one entry in the wireless network list and click the button to connect the device with the selected network. Refresh: rescan the wireless network around.
11n Wireless PCI Adapter User Guide 3.1.4 Profile Management This window saves the general wireless parameters for different profiles, which is used to fast connect the wireless network you need. UP/DOWN: To change the profile’s sequence in the list. Connect: To activate one profile. New: To create a new profile and configure the site status and security setting. Modify: To modify one existing profile. Delete: To delete one existing profile.
11n Wireless PCI Adapter User Guide (Site Status) (Security Setting) -15-
11n Wireless PCI Adapter User Guide 3.1.5 Statistics Statistics is used to summarize Rx and Tx data packets, including the success and error packet amount. Clear: click this button to renew the statistics. 3.1.6 WPS Setting WPS setting is enabled only on WPS-compliant devices.
11n Wireless PCI Adapter User Guide PIN： Enter the Pin code and click the “PIN” to automatically connect the wireless adapter with wireless devices around. PBC： Click the “PBC” to complete auto-check and connections between wireless adapter and other wireless device. Refresh: to update the Pin code. Rescan: to rescan the WPS-compliant wireless network around. Connect: click this button to connect the WPS wireless network. Disconnect: to disconnect the connected wireless network.
11n Wireless PCI Adapter User Guide 3.2 AP Mode 3.2.1 AP Mode Topology The device also can serve as an access point to transmit wireless signals and create wireless network, allowing other wireless clients to access the network. Click the AP Mode icon to enter the AP Mode interface.
11n Wireless PCI Adapter User Guide 3.2.2 Basic Setting This window is used to configure the AP’s basic parameters, including SSID, Wireless Mode and Channel. SSID: Wireless network’s ID name scanned by wireless adapter. Wireless Mode: 802.11b/802.11g/802.11b/g mixed. Channel: 1~11 channels provided. Restore Default: to restore the set parameters to default factory default settings. Apply: to make the changes made take effect.
11n Wireless PCI Adapter User Guide 3.2.3 Security Setting This window is used to configure the wireless network’s security authentication, providing WEP, WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK encryption methods. WEP：10/26 bits Hex or 5/13 ASCII support. WPA-PSK：8~32 bits ASCII support. WPA2-PSK：8~32 bits ASCII support. WPA-PSK/WPA2-PSK：8~32 bits ASCII support. Note: 1.
11n Wireless PCI Adapter User Guide a~f letters. 2. ASCII characters include any numbers/letters and characters. 3.2.4 Access Control Access Control is based on the MAC address to decide that the specified client connects to the wireless network, or disables it to access the wireless network. Filter Policy: Disabled: to disable the filter function.
11n Wireless PCI Adapter User Guide access the wireless network. All Blocked: to refuse all clients in the list to access the wireless network. MAC Address：to input the client’s MAC address to implement the corresponding filter policy. For example: b0000a8cd702. Add: to add the entered MAC address into the list. Delete: to delete one existing MAC address in the list. Remove All: to delete all clients’ MAC address in the list. Apply: to make the changes made take effect.
11n Wireless PCI Adapter User Guide 3.2.5 About This window displays something about software version and wireless adapter.
11n Wireless PCI Adapter User Guide Appendix One: Acronyms and Terms WLAN Wireless Local Area Network 802.11 A family of specifications developed by the IEEE for WLAN technology. 802.11a An extension to 802.11 WLAN standard that provides up to 54 Mbps transmission in the 5 GHz UNI radio band. 802.11b An extension to 802.11 WLAN standard that provides up to 11 Mbps transmission in the 2.4 GHz ISM radio band. 802.11b uses DSSS modulation. 802.11g An extension to 802.
11n Wireless PCI Adapter User Guide BSSID Basic Service Set ID DHCP Dynamic Host Configuration Protocol DSSS Direct Sequence Spread Spectrum. DSSS is one of two types of spread spectrum radio. frequency-hopping The spread other is spectrum (FHSS). QoS Quality of Service OFDM Orthogonal Frequency Division Multiplexing RADIUS Remote Authentication Dial In User Service RTS Request to Send SSID Service Set Identifier.
11n Wireless PCI Adapter User Guide WEP Wired Equivalent Privacy. A security protocol for WLANs defined in the IEEE 802.11 standard. WPA Wi-Fi Protected Access WPA2 Wi-Fi Protected Access 2. The next generation of Wi-Fi security, based on the 802.11i standard.
11n Wireless PCI Adapter User Guide Appendix Two: How to connect with PSP 1.
11n Wireless PCI Adapter User Guide Select Channel 2. In W302P Utility Interface scan PSP and double-click to connect the wireless network.
11n Wireless PCI Adapter User Guide 3. In Site Survey check “enable PSP connection mode” box. 4. To configure Xlink Kai Select “Start”→ “All programmers” → “Xlink Kai Evolution VII” → “Start Kai Config” to configure the user name, password and other parameters as follows.
11n Wireless PCI Adapter User Guide 5. Login Xlink Kai Select “Start”→ “All programmers” → “Xlink Kai Evolution VII” → “Start Kai”. PSP will connect with Xlink Kai automatically. The following window will indicate the connection is established well now.
11n Wireless PCI Adapter User Guide FCC Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
11n Wireless PCI Adapter User Guide a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.
