1N Wireless Broadband Rout er User Guide Wireless- N Broadband Rout er W308R Not ice: RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
11N Wireless Broadband Rout er User Guide Copyright St at em ent is t he regist ered t radem ark of Shenzhen Tenda Technology Co., Lt d. All t he product s and pr oduct nam es m ent ioned regist ered herein t radem arks are of t heir t he t radem arks respect ive or holders. Copyright of t he whole product as int egrat ion, including it s accessories and soft ware, belongs t o Shenzhen Tenda Technology Co., Lt d. Wit hout t he perm ission of Shenzhen Tenda Technology Co.
11N Wireless Broadband Rout er User Guide Contents CHAPTE R 1 PRODUCT INTRODUCTION .........................................1 1.1 PACK AGE C ONTE NTS.............................................................................2 1.2 LE D INDICATORS AND PORT D E SCRIPTION ......................................2 CHAPTE R 2 PRODUCT INSTALLAT ION............................................5 CHAPTE R 3 HOW TO CONFIGURE TO ACCE SS THE INT E RNE T ...................................................................
11N Wireless Broadband Rout er User Guide 6.1 DHCP SE TTINGS ..................................................................................49 6.2 DHCP C LIE NT L IST .............................................................................50 CHAPTE R 7 V IRT UAL SE RV E R ...........................................................52 7.1 PORT R ANGE F ORWARDING ............................................................... 52 7.2 DMZ SE TTINGS ........................................................
11N Wireless Broadband Rout er User Guide APPE NDIX 2 PRODUCT FE AT URE S .................................................85 APPE NDIX 3 FAQ ....................................................................................86 APPE NDIX 4 CLE AR WIRE LE SS CONFIGURATION ...................90 APPE NDIX 5 RE GULATORY INFORMATION ...............................
11N Wireless Broadband Rout er User Guide Ch a pt e r 1 Pr odu ct I n t r odu ct ion Thank you for purchasing t he Tenda W308R Wireless Broadband Rout er! This easy- t o- use rout er provides sim ple configurat ion int erface which enables you t o configure it wit h ease. I t is based on t he lat est I EEE802.11n st andard, and is backward com pat ible wit h devices of I EEE802.11b/ g st andar ds.
11N Wireless Broadband Rout er User Guide 1 .1 Pa ck a ge Con t e n t s Please verify t he following it em s aft er you open t he package: ¾ One W308R Wireless Broadband Rout er ¾ One Quick I nst allat ion Guide ¾ One Power Adapt er ¾ One Soft ware CD I f any of t he list ed it em s are m issing or dam aged, please cont act t he Tenda reseller for im m ediat e replacem ent . 1 .
11N Wireless Broadband Rout er User Guide LED in dica t or de scr ipt ion on t h e fr on t pa n e l Ba ck pa n e l por t sh ow 3
11N Wireless Broadband Rout er User Guide Ba ck pa n e l por t de scr ipt ion 4
11N Wireless Broadband Rout er User Guide Ch a pt e r 2 Pr odu ct I n st a lla t ion 1. Please use only t he included power adapt er t o power your rout er. ( N OTE: Use of an unm at ched power adapt er could cause dam age t o t his product ) . 2. Please connect t he rout er ’s LAN port t o your com put er wit h an Et hernet cable as shown below.
N Wireless Broadband Rout er User Guide 3. Please connect your broadband line provided by your I SP t o t he rout er ’s WAN port . 4. I nsert t he included soft ware CD int o t he CD drive of your com put er. Aft er t he soft ware aut om at ically init iat es, double click t he “ Se t u p” icon and follow t he inst ruct ions t o com plet e t he inst allat ion. You can also ent er t he rout er ’s Web- based Ut ilit y t o com plet e t he configurat ion.
11N Wireless Broadband Rout er User Guide Ch a pt e r 3 H ow t o con figu r e t o a cce ss the I nternet 3 .1 H ow t o Se t t h e N e t w or k Con figu r a t ion s N e t w or k Con figu r a t ion s u n de r w indow s XP 1. Right click “ M y N e t w or k Pla ce s” on your com put er deskt op and select “ Pr ope r t ie s”. 2. Right click “ Loca l Ar e a Con n e ct ion ” and select “ Pr ope r t ie s”.
11N Wireless Broadband Rout er User Guide 3. Select “ I n t e r n e t Pr ot ocol ( TCP/ I P) ” and click “ Pr ope r t ie s”. 4.
11N Wireless Broadband Rout er User Guide “ Obt a in D N S se r ve r a ddr e ss a u t om a t ica lly”. Click “ OK” t o save t he configurat ions. Or select “ Use t h e follow in g I P a ddr e ss” and ent er t he I P addr ess, Subnet m ask, Default gat eway as follows: ¾ I P Addr e ss: 192.168.0.XXX: ( XXX is a num ber from 2~ 254) ¾ Su bn e t M a sk : 255.255.255.0 ¾ Ga t e w a y: 192.168.0.1 ¾ D N S se r ve r : You should input t he DNS server address provided by your I SP.
11N Wireless Broadband Rout er User Guide N e t w or k Con figu r a t ion s un de r w in dow s 7 1. Click t he net work icon on t he lower right corner of your com put er deskt op, and t hen click” Open Net work and Sharing Cent er ”.
11N Wireless Broadband Rout er User Guide 2. Click “ Change adapt er set t ings” on t he left side of t he window. 3. Right click “ Local Area Connect ion” and select “ Propert ies”.
11N Wireless Broadband Rout er User Guide 4. Double click” I nt ernet Prot ocol Version 4( TCP/ I Pv4) " .
11N Wireless Broadband Rout er User Guide 5. Select “ Obt a in a n I P a ddr e ss a u t om a t ica lly” and “ Obt a in D N S se r ve r a ddr e ss a u t om a t ica lly”. Click “ OK” t o save t he configurat ions.
11N Wireless Broadband Rout er User Guide ¾ I P Addr e ss: 192.168.0.XXX: ( XXX is a num ber from 2~ 254) ¾ Su bn e t M a sk : 255.255.255.0 ¾ Ga t e w a y: 192.168.0.1 ¾ D N S se r ve r : You should input t he DNS server address provided by your I SP. Ot herwise, you can ent er 192.168.0.1. Click “ OK” to save t he configurat ions. 3 .2 Log in t o t h e Rou t e r 1.
11N Wireless Broadband Rout er User Guide 2. Type “ a dm in ” in t he “ Pa ssw or d” field. Click “ OK”. 3. I f you ent er t he correct password, you will com e t o t he rout er ’s web- based ut ilit y as is shown below.
11N Wireless Broadband Rout er User Guide 3 .3 Fa st I n t e r n e t Acce ss Two kinds of fast access m et hods are pr ovided on t he rout er ’s web- based ut ilit y: ADSL dial- up and DHCP. I f you select ADSL dial- up, you only need t o ent er t he access account and access password as well as t he wireless password, and t hen click “ Ok” t o com plet e t he set t ings. I f you select DHCP, you only need t o ent er t he wireless password and click “ Ok” t o com plet e t he set t ings.
11N Wireless Broadband Rout er User Guide The default access m et hod is ADSL dial- up and t he access account and access password are t he sam e as t he ADSL dial- up account and passwor d, which you can inquire your broadband I SP. For ot her access m et hods, please refer t o WAN set t ings in chapt er 4.The wireless password can only consist of 8 charact ers, t he default is 12345678 and you can m odify it when necessary.
11N Wireless Broadband Rout er User Guide 3 .4 Fa st En cr ypt ion The rout er provides t wo encrypt ion set t ing screens, one is sim ple and easy, t he ot her is advanced ( For advanced set t ing, please refer t o chapt er 5.2) . Sim ple a n d e a sy scr e e n: Log on t o t he rout er ’s web- based ut ilit y and you m ay set encrypt ion for t he rout er. The default adopt s WPA- PSK m ode and AES Algorit hm . The default password is 12345678, as shown below.
11N Wireless Broadband Rout er User Guide Ch a pt e r 4 Adva n ce d Se t t in gs 4 .1 Syst e m St a t u s Syst em st at us screen allows you t o view t he rout er ’s WAN port st at us and syst em st at us. Con n e ct ion st a t u s: I t displays t he rout er ’s WAN connect ion st at us. Disconnect ed: I t indicat es t he rout er ’s WAN por t hasn’t been connect ed wit h t he net work cable. Connect ing: I t indicat es t he rout er ’s WAN port is obt aining I P address.
11N Wireless Broadband Rout er User Guide Con n e ct ion t ype : I t displays your current access m et hod. LAN M AC a ddr e ss:I t displays t he Rout er ’s LAN MAC address. W AN M AC a ddr e ss:I t displays t he Rout er ’s WAN MAC Address.
11N Wireless Broadband Rout er User Guide 4 .2 W AN Se t t in gs Vir t u a l D ia l- u p ( PPPoE) ¾ M ode : Show your current connect ion m ode. ¾ Acce ss Accou n t : Ent er t he account provided by your I SP. ¾ Acce ss Pa ssw or d: Ent er t he password provided by your I SP. ¾ M TU: Maxim um Transm ission Unit .
11N Wireless Broadband Rout er User Guide net work. The default value is 1492. Do NOT m odify it unless necessary, but if a specific websit e or web applicat ion soft ware cannot open or be enabled, you can t ry t o change t he MTU value t o 1450, 1400, et c. ¾ Se r vice N a m e : The connect ion nam e for current PPPOE, ent er it if necessary ,ot herwise, leave it blank.
11N Wireless Broadband Rout er User Guide se t t in gs” from “ Syst e m t ools”. St a t ic I P I f your I SP provides you t he st at ic I P, please choose st at ic I P, and you need t o ent er t he I P address, subnet m ask, gat eway, DNS server and alt ernat e DNS server provided by your I SP or net work adm inist rat or。 ¾ M ode : Show your current connect ion m ode. ¾ I P a ddr e ss: Ent er t he WAN I P address provided by your I SP. I f you are not clear, please inquire your local I SP.
11N Wireless Broadband Rout er User Guide ¾ D N S se r ve r : Ent er t he necessary DNS server provided by your I SP. ¾ Alt e r n a t e D N S se r ve r : Ent er t he second DNS address if your I SP provides, which is opt ional. D yn a m ic I P ( Via D H CP) I f your connect ion m ode is Dynam ic I P, it m eans every t im e you access t he I nt er net , you will get a different I P. You don’t need t o ent er any param et ers in t his m ode, j ust Click “ Ok ” t o finish t he set t ings.
11N Wireless Broadband Rout er User Guide ¾ ¾ M ode : Show your current connect ion m ode. PPTP se r ve r a ddr e ss: The I P addr ess or dom ain nam e of t he dest inat ion server and it is used t o specify t he dest inat ion address which needs for PPTP connect ion. ¾ Use r n a m e / Pa ssw or d: Used t o validat e ident it y when connect ing t o t he PPTP server. ¾ Addr e ss m ode : Set t he r out er ’s I P address m ode, you can select eit her “ Dynam ic” or “ St at ic”.
11N Wireless Broadband Rout er User Guide ¾ Su bn e t m a sk : Please ent er t he subnet m ask provided by your I SP ,generally it s 255.255.255.0 ¾ Ga t e w a y: Please ent er t he gat eway provided by your I SP, inquire your local I SP if you are not clear. All t he above param et er s are provided by I SP. L2 TP ¾ ¾ M ode : Show your current connect ion m ode.
11N Wireless Broadband Rout er User Guide when connect ing t o t he L2TP server. ¾ Addr e ss m ode : Set t he r out er ’s I P address m ode, you can select eit her “ Dynam ic” or “ St at ic”. I f your I SP doesn’t provide t he I P address, please select “ Dynam ic”. ¾ I P a ddr e ss: Please ent er t he I P address provided by your I SP, inquire your local I SP if you are not clear. ¾ Su bn e t m a sk : Please ent er t he subnet m ask provided by your I SP ,generally it s 255.255.255.
11N Wireless Broadband Rout er User Guide 4 .3 LAN Se t t in gs Click “Advanced set t ings” –LAN set t ings t o ent er t he following screen. ¾ LAN M AC a ddr e ss: The Rout er ’s LAN MAC address, which is unchangeable. ¾ I P a ddr e ss: The Rout er ’s LAN I P addr ess ( not your PC’s I P address) .The default value is 192.168.0.1; you can change it when necessary. ¾ Su bn e t m a sk : The Rout er ’s LAN subnet m ask. The default value is 255.255.255.
11N Wireless Broadband Rout er User Guide 4 .4 D N S Se t t in gs DNS st ands for Dom ain Nam e Syst em ( or Service) . ¾ D N S se t t in g: Select t o enable t he DNS server. ¾ Pr im a r y D N S a ddr e ss: Ent er t he necessary address provided by your I SP. ¾ Alt e r n a t e D N S a ddr e ss: Ent er t he second DNS address if your I SP provides, which is opt ional. N OTE: Aft er t he set t ings are com plet ed, reboot t he device t o act ivat e t he m odified set t ings.
11N Wireless Broadband Rout er User Guide 4 .5 Ba n dw idt h Cont r ol Bandwidt h cont rol is used t o lim it t he com m unicat ion t raffic of LAN com put ers w hen accessing t he I nt ernet . I t can sim ult aneously cont rol m axim um of 254 PCs' t raffic. In addit ion, IP address range configurat ion is support ed. ¾ En a ble Ba n dw idt h Con t r ol: To enable or disable t he int ernal I P bandwidt h cont rol. The default is disabled.
11N Wireless Broadband Rout er User Guide download. ¾ Ba n dw idt h Ra n ge : The m axim um and m inim um upload/ download dat a t raffic of t he host s in specified I P range. The unit is KByt e/ s. The uplink of upload and download can not exceed t he WAN port bandwidt h lim it at ion range. ¾ Ena ble : To enable t he current edit ed rule. Ot herwise, t he rule will not go int o effect .
11N Wireless Broadband Rout er User Guide 1.Ent er 192.168.0.100 in t he I P addr ess field 2.Select upload in t he Upload/ Download field. 3.Ent er 10- 15 in t he bandwidt h range field 4.Select “ Enable” 5.Click “Add t o list ” 6.Click “ Ok” t o finish t he upload rule set t ings. And t hen add a download rule as shown in t he pict ure below.
11N Wireless Broadband Rout er User Guide The set t ing m et hod is t he sam e as t he above. Ex a m ple 2 Set t he download rat e of all com put ers wit hin t he range of 192.168.0.2- - 192.168.0.254 as 100- 120KByt e/ s, and t he upload rat e as 20- 30KByt e/ s, as shown in t he pict ure below.
11N Wireless Broadband Rout er User Guide The set t ing m et hod is t he sam e as Ex a m ple 1 .
11N Wireless Broadband Rout er User Guide 4 .6 Tr a ffic St a t ist ics Traffic st at ist ics is used t o display t he bandwidt h t hat LAN PC used. En a ble Tr a ffic st a t ist ics: I t is used t o calculat e t he t raffic used by t he LAN com put ers. You can enable it t o calculat e t he t raffic for you. Usually, disable it t o im prove t he rout er ’s dat a packet processing abilit y, and t he default is disabled.
11N Wireless Broadband Rout er User Guide second, t he unit is KByt e/ s. ¾ Se n t m e ssa ge : t he num ber of t he calculat ed com put er ’s dat a packet s t hat are sent out t hrough t he rout er. ¾ Se n t Byt e s: t he volum e of t he calculat ed com put er ’s st at ist ics t hat is sent out t hrough t he rout er ¾ Re ce ive d m e ssa ge : t he num ber of t he calculat ed com put er ’s t he dat a packet s t hat are received t hrough t he rout er.
11N Wireless Broadband Rout er User Guide Ch a pt e r 5 W LAN Se t t in gs 5 .1 W ir e le ss Ba sic Se t t in gs ¾ En a ble w ir e le ss fu n ct ion : Select t o enable t he Rout er ’s wireless feat ures; deselect t o disable it and all funct ions relat ed wit h wireless are disabled.
11N Wireless Broadband Rout er User Guide drop- down list . 1 1 b m ode :Select it if you have only Wireless- B client s in your net work. 1 1 g m ode :Select it if you have only Wireless- G client s in your net work. 1 1 b/ g m ix e d m ode : Select it if you have only Wireless- B and Wireless- G client s in your net work. 1 1 b/ g/ n m ix e d m ode : Select it if you have Wireless- B, Wireless- G and Wireless- N client s in your net work.
11N Wireless Broadband Rout er User Guide ¾ APSD Ca pa ble : I t is used for aut o power- saved service. The default is disabled. ¾ Ch a n n e l channel ba n dw idt h : bandwidt h to Select an enhance appropriat e t he wireless perform ance. Select 20/ 40M when t he net work has 11b/ g and 11n wireless client s. Select 20M when t he net work has only non- 11n wireless client s. Select 20/ 40M t o prom ot e it s t hroughput when t he wireless net work is in 11n m ode.
11N Wireless Broadband Rout er User Guide ¾ AP M AC a ddr e ss: I nput t he MAC address of anot her ( opposing) wireless rout er you want t o connect . Ex a m ple : This exam ple is t o bridge t wo 316R rout ers. 1. I f you know t he connect ing rout er ’s MAC address, please ent er it int o t he AP MAC address field and click “ Ok”.
11N Wireless Broadband Rout er User Guide 2. You can also search for t he wireless rout er ’s signal by scanning. a) Click “ Open scan” and click t he scanned signal and click t he ” Ok” but t on on t he dialog box and t he corresponding wireless MAC address will be added t o t he AP MAC address field aut om at ically.
11N Wireless Broadband Rout er User Guide b) Click “ Ok” aft er t he MAC address is added.
11N Wireless Broadband Rout er User Guide Aft er finishing t he above st eps, you need t o set t he ot her W308R rout er in t he sam e way. N OTE: WDS feat ure requires bot h rout ers support t his funct ion and t he SSI D, channel, encrypt ion m et hod and passwor d are t he sam e as t hose of t he connect ing rout er. 5 .
11N Wireless Broadband Rout er User Guide int ercept ing or int ruding your wireless net work. 5 .2 .1 W PS Se t t in gs WPS ( Wi- Fi Prot ect ed Set t ing) m akes it quick and easy t o est ablish a secure connect ion bet ween t he wireless client s and t he rout er. The users only need t o ent er a PI N code or press WPS but t on on t he back panel t o configure it w it hout m anually select ing an encrypt ion m et hod or set a key. ¾ W PS se t t in gs: To enable or disable WPS funct ion.
11N Wireless Broadband Rout er User Guide ¾ W PS m ode : Provide t wo ways: PBC ( Push- But t on Configurat ion) and PI N code. ¾ PBC: Select t he PBC and click Ok , or press and hold t he WPS but t on on t he back panel of t he device for about one second. The WPS LED indicat or will be flashing for 2 m inut es, which m eans t he WPS is enabled. During t his t im e ( flashing WPS LED) , you can enable t he w ireless client t o im plem ent t he WPS/ PBC negot iat ion bet ween t hem .
11N Wireless Broadband Rout er User Guide ¾ W PA Algor it hm s: Provides TKI P [ Tem poral Key I nt egrit y Prot ocol] or AES [ Advanced Encrypt ion St andard] . ¾ Ke y: Ent er t he pass phrase t hat consist s of 8- 63 ASCI I charact ers. ¾ Ke y Re n e w a l I n t e r va l : Set t he key’s renewal period, w hich t ells t he device how oft en it should change t he dynam ic keys.
11N Wireless Broadband Rout er User Guide 5 .2 .3 W PA2 - PSK WPA2 ( Wi- Fi Prot ect ed Access version 2) provides higher securit y t han and WPA ( Wi- Fi Prot ect ed Access) . ¾ W PA Algor it hm s: Provides TKI P [ Tem poral Key I nt egrit y Prot ocol] or AES [ Advanced Encrypt ion St andard] . ¾ Ke y: Ent er t he pass phrase t hat consist s of 8- 63 ASCI I charact ers.
11N Wireless Broadband Rout er User Guide 5 .3 W ir e le ss Acce ss Con t r ol Wireless access cont rol is act ually based on t he MAC address t o perm it or forbid specific client s t o access t he wireless net work. ¾ M AC a ddr e ss filt e r : “ Pe r m it ” indicat es t o allow t he client s in t he list t o access t he wireless net work, “ For bid” indicat es t o prevent t he client s in t he list from accessing t he wireless net work.
11N Wireless Broadband Rout er User Guide 5 .4 Con n e ct ion St a t u s This screen shows wireless client ’s connect ion st at us, including MAC address, Channel bandwidt h. ¾ M AC a ddr e ss: Shows t he MAC addresses of t he host s connect ed t o t he Rout er. ¾ Ba n dw idt h : Shows t he channel bandwidt h of t he current connect ed host s ( wireless client s) . Ch a pt e r 6 D H CP Se r ve r 6 .
11N Wireless Broadband Rout er User Guide prem ise of act ivat ing “ Obt ain an IP Address Aut om at ically”. So specifying t he st art and end addr ess of t he I P Address pool is needed. ¾ D H CP se r ve r : Check t he Ena ble box t o enable ¾ I P pool st a r t / e n d a ddr e ss: Ent er t he range of I P DHCP server. addresses for DHCP server dist ribut ion.
11N Wireless Broadband Rout er User Guide are assigned by t he DHCP server. You can m anually ent er t he I P and MAC addr ess and convert t hem t o st at ic assignm ent . ¾ H ost n a m e : I t displays t he nam e of t he com put er whose I P is allocat ed by t he DHCP server. ¾ I P a ddr e ss: Ent er t he I P address w hich needs st at ic binding. ¾ M AC a ddr e ss: Ent er t he MAC address of t he com put er you want t o bind. Click “ Add” t o add t he ent ry in t he list .
11N Wireless Broadband Rout er User Guide Ch a pt e r 7 Vir t u a l Se r ve r 7 .1 Por t Ra n ge For w a r din g ¾ St a r t / En d por t : Ent er t he st art / end port num ber which ranges t he Ext ernal port s used t o set t he server or I nt ernet applicat ions. ¾ LAN I P: Ent er t he I P address of t he PC which you want t o set as t he server. ¾ Pr ot ocol: Select t he prot ocol ( TCP/ UDP/ Bot h) for t he applicat ion.
11N Wireless Broadband Rout er User Guide prot ocol you are using, you can select “ Bot h”. ¾ Ena ble : Click t he Ena ble checkbox t o bring t he set rule int o effect . ¾ D e le t e : Clear all set t ings of t his it em . ¾ W e ll- k n ow n se r vice por t : The well- known prot ocol port s are list ed in t he drop- down list . Select one and select a sequence num ber in t he I D drop- down list and t hen click “Add”, t his port will be added aut om at ically t o t he I D list .
11N Wireless Broadband Rout er User Guide and it s port 21 will be added t o t he corresponding field aut om at ically. 2. Ent er 192.168.0.10 in t he LAN I P colum n, and t hen select “ Bot h” as t he prot ocol and select “ Enable”. 3. As t he pict ure shown below. 4. Click t he “ Ok” but t on t o save t he set t ings. And now, when your friends want t o visit t he FTP ser ver, t hey only need t o ent er ft p: / / xxx.xxx.xxx.xxx: 21 in t he address field. Here, xxx.xxx.xxx.
11N Wireless Broadband Rout er User Guide ft p: / / 172.16.102.89: 21 in t he address field. N OTE: I f you set t he service port of t he virt ual server as 80, you m ust set t he Web m anagem ent port on Rem ot e Web Managem ent screen t o be any value except 80 such as 8080. Ot herwise, t here will be a conflict t o disable t he virt ual server.
11N Wireless Broadband Rout er User Guide 7 .2 D M Z Se t t in gs The DMZ Set t ings screen allows one local com put er t o be exposed t o t he I nt ernet for use of a special- purpose service such as I nt ernet gam ing or videoconferencing. DMZ host ing forwards all t he port s at t he sam e t im e t o one PC. ¾ D M Z H ost I P Addr e ss: The I P addr ess of t he LAN com put er you want t o set as DMZ host . ¾ Ena ble : Check t o enable t he DMZ host .
11N Wireless Broadband Rout er User Guide 7 .3 UPN P Se t t in gs UPnP ( Universal Plug and Play) .Wit h t he UPnP funct ion, t he int ernal host can request t he rout er t o process som e special port swit ching so as t o enable t he ext ernal host t o visit t he resources of t he int ernal host . ¾ En a ble UPn P: Click t he checkbox t o enable t he UPnP. N OTE: This funct ion goes int o effect under Windows XP or Windows ME ( N OTE: t he syst em should int egrat e or have inst alled t he Direct x 9.
11N Wireless Broadband Rout er User Guide Ch a pt e r 8 Se cu r it y Se t t in gs 8 .1 Clie n t Filt e r Se t t in gs You can enable client filt er t o cont rol LAN com put ers’ access t o som e port s of t he I nt ernet 。 ¾ Filt e r M ode : You can select eit her “ Perm it only” or “ Forbid only”. ¾ Acce ss Policy: Select one num ber from t he drop- down list . ¾ Re m a r k : A sim ple descript ion of t he configured file. You can also leave it blank.
11N Wireless Broadband Rout er User Guide ¾ Por t : Ent er t he cont rolled TCP/ UDP prot ocol port . You can specify a port or port range. ¾ Type : Select one prot ocol ( TCP/ UDP/ Bot h) from t he drop- down list . ¾ Tim e : Select t he t im e range of client filt er. ¾ D a t e : Select t he day( s) t o run t he access policy. ¾ Ena ble : To ( forbid/ perm it enable/ disable t he access t he packet s m at ched policy wit h t he access policy t o pass t hrough t he rout er.
11N Wireless Broadband Rout er User Guide 18: 00 from Sunday t o Sat urday. 8 .2 M AC Addr e ss Filt e r You can lim it t he com put er ’s access t o I nt ernet by MAC Address Filt er.
11N Wireless Broadband Rout er User Guide ¾ Filt e r m ode : You can select eit her “ Perm it only” or “ Forbid only”. ¾ Acce ss Policy: Select one num ber from t he drop- down list . ¾ Re m a r k : A sim ple descript ion of t he configured file. You can also leave it blank. ¾ M AC Addr e ss: Ent er t he MAC address you want t o run t he access policy. ¾ Tim e : Select t he t im e range of MAC address filt er. ¾ D a t e : Select t he day( s) t o run t he access policy.
11N Wireless Broadband Rout er User Guide of 00: E0: 4C: 69: A3: 23 t o access I nt ernet during 8: 00 t o 18: 00 from Monday t o Friday. Ex a m ple 2 Perm it t he com put er wit h t he MAC addr ess of 00 :E4 :A5 :44 :35 :69 t o access I nt ernet from Monday t o Friday.
11N Wireless Broadband Rout er User Guide 8 .3 URL Filt e r Se t t in gs You can use URL filt ering t o forbid t heir access t o cert ain websit es at a specified t im e. ¾ Filt e r M ode : You can select eit her “ Perm it only” or ¾ Acce ss Policy: Select one num ber from t he “ Forbid only”. drop- down list . ¾ Re m a r k : A sim ple descript ion of t he configured file. ¾ St a r t / En d I P: Ent er t he st art / end I P address. ¾ URL ch a r a ct e r st r in g: You can also leave it blank.
11N Wireless Broadband Rout er User Guide ¾ Tim e : Select t he t im e range of URL filt er. ¾ D a t e : Select t he day( s) t o run t he access policy. ¾ Ena ble : To enable/ disable t he access policy ( forbid / perm it t he packet s m at ched wit h t he access policy t o pass t hrough t he rout er ) . Ex a m ple 1 Forbid all com put ers on LAN t o access baidu.com during 8: 00 t o 18: 00 from Monday t o Friday. Ex a m ple 2 Perm it LAN com put ers wit h t he I P addresses of 192.168.0.
11N Wireless Broadband Rout er User Guide N OTE: Ent er only one dom ain nam e for each access policy for one access policy can only filt er one dom ain nam e. So, if you want t o filt er m ult iple dom ain nam es, you need t o set m ult iple access policies 8 .4 Re m ot e W e b M a n a ge m e n t This sect ion inst ruct s how t o allow t he net work adm inist rat or t o m anage t he Rout er r em ot ely.
11N Wireless Broadband Rout er User Guide ¾ Ena ble : Check to enable rem ot e web m anagem ent . ¾ Por t : The m anagem ent port open t o out side ¾ I P Addr e ss: Specify t he range of t he I P addresses access. The default value is 80. of t he com put ers on t he I nt ernet for rem ot e m anagem ent . N OTE: 1. I f you want t o log in t he device’s Web- based Ut ilit y via port 8080, you need t o use t he form at of WAN I P address: port ( for http : exam ple //220.135.211.
11N Wireless Broadband Rout er User Guide Rout er t o im plem ent rem ot e web m anagem ent . For e x a m ple : I f you want t o configure t he com put er at t he I P address of 218.88.93.33 t o access t he rout er ’s w eb- based ut ilit y via port 8080, please set t he param et er s as above.
11N Wireless Broadband Rout er User Guide Ch a pt e r 9 Rou t in g Se t t in gs 9 .1 Rou t in g Ta ble This page shows t he rout er ’s core rout ing t able. The m ain dut y for a rout er is t o look for a best pat h for every dat a packet , and t ransfer t his dat a packet t o a dest inat ion st at ion. I n order t o fulfill t his funct ion, m any t ransferring pat hs, i.e. rout ing t able, are saved in t he rout er, for choosing when needed. 9 .
11N Wireless Broadband Rout er User Guide D e st in a t ion n e t w or k I P a ddr e ss: The dest inat ion host or I P segm ent you visit . Su bn e t m a sk : Ent er t he subnet m ask , generally it is 255.255.255.0 Ga t e w a y: The ent ry I P address of t he next rout er. NOTE: 1. The gat eway m ust be at t he sam e net segm ent wit h t he rout er ’s LAN I P. 2. I f t he dest inat ion I P address is one host ’ addr ess, t hen t he subnet m ask m ust be 255.255.255.255. 3.
11N Wireless Broadband Rout er User Guide Ch a pt e r 1 0 Syst e m Tools 1 0 .1 Tim e Se t t in gs This sect ion is t o configure t he rout er ’s syst em t im e. You can set it m anually or obt ain t he GMT t im e from t he I nt ernet . ¾ Tim e zon e : Select t he t im e zone where you are operat ing t he Rout er from t he drop- down list . ¾ Cu st om ize d t im e : Ent er t he t im e you wish t o configure. N OTE: When t he Rout er is powered off, t he t im e set t ings will be lost .
11N Wireless Broadband Rout er User Guide I nt ernet . Only when you connect t o t he I nt ernet and obt ain t he GMT t im e or set t he t im e on t his screen, can t he t im e set t ings in ot her funct ions ( e.g. securit y set t ings) t ake effect . 1 0 .2 D D N S The DDNS ( Dynam ic Dom ain Nam e Syst em ) is support ed in t his Rout er. I t is used t o assign a fixed host and dom ain nam e t o a dynam ic I nt ernet I P addr ess.
11N Wireless Broadband Rout er User Guide ¾ M a in fe a t u r e s: 1. Most ly, your I SP provides a dynam ic I P addr ess and t he DDNS is used t o capt ure t he changeable I P address and m at ch t o t he fixed dom ain. Then users can have access t o t he I nt ernet t o com m unicat e wit h ot hers out side t he net work. 2. DDNS can help you t o est ablish a virt ual host in your hom e or com pany. ¾ D D N S: Click t he radio but t on t o enable or disable t he DDNS service.
11N Wireless Broadband Rout er User Guide account inform at ion in DDNS server, you can t hen access t he web page by ent ering ht t p: / / t enda.3322.org in t he address field. 1 0 .3 Ba ck u p/ Re st or e On t his screen, you can back up t he rout er ’s curr ent set t ings or rest ore previous set t ings. ¾ Ba ck u p Se t t in g: Click t he Ba ck u p but t on t o back up t he Rout er ’s set t ings and select a pat h t o save t hem .
11N Wireless Broadband Rout er User Guide Click t he “ Sa ve ” but t on t o save t he configurat ion files.
11N Wireless Broadband Rout er User Guide ¾ Re st or e Se t t in g: Click t he “ Br ow se ” but t on t o select t he backup files. Click t he “ Re st or e ” but t on t o rest ore previous set t ings.
11N Wireless Broadband Rout er User Guide 76
11N Wireless Broadband Rout er User Guide 1 0 .4 Re st or e t o Fa ct or y D e fa u lt This screen allows you t o rest ore all set t ings t o t he fact ory default values. ¾ Re st or e : Click t his but t on t o rest ore t o default set t ings. ¾ Fa ct or y de fa u lt se t t in gs: Pa ssw or d: adm in I P a ddr e ss: 192.168.0.1 Su bn e t m a sk : 255.255.255.0 N OTE: Aft er rest oring t o default set t ings, please rest ar t t he rout er t o m ake t he default set t ings effect ive. 1 0 .
11N Wireless Broadband Rout er User Guide upgrade file from our websit e, www.t enda.cn. ¾ Br ow se : Click t his but t on t o select t he upgrade ¾ Upgr a de : Click t his but t on t o st art t he upgrading file. process. Aft er t he upgrade is com plet ed, t he rout er will reboot aut om at ically. 1 0 .6 Re boot t h e Rou t e r Reboot t he rout er t o m ake t he configurat ion effect ive. The rout er will cut it s WAN connect ion aut om at ically aft er reboot ing.
11N Wireless Broadband Rout er User Guide Re boot t h e r ou t e r : Click t his but t on t o reboot t he rout er. 1 0 .7 Pa ssw or d Ch a n ge This sect ion is t o set a new password t o bet t er secure your rout er and net work. ¾ Old pa ssw or d: Ent er t he old password. ¾ N e w pa ssw or d: Ent er a new password.
11N Wireless Broadband Rout er User Guide ¾ Con fir m n e w pa ssw or d: Re- ent er t o confirm t he new password. N OTE: To secure t he rout er and your net work, it is highly recom m ended t hat you password.
11N Wireless Broadband Rout er User Guide 1 0 .8 Syslog The sect ion is t o view t he syst em log. You can view various condit ions appearing aft er syst em st art , and also check whet her t here’s an at t ack on t he net work. The log can record at m ost 150 ent ries. ¾ Re fr e sh : Click t his but t on t o updat e t he log. ¾ Cle a r : Click t his but t on t o clear t he current shown log.
11N Wireless Broadband Rout er User Guide 1 0 .9 Log ou t Aft er all set t ings are finished, please click’” Log out ” t o exit securely and com plet ely.
11N Wireless Broadband Rout er User Guide Appe n dix 1 Glossa r y Ch a n n e l: An inst ance of m edium use for t he purpose of passing prot ocol dat a unit s ( PDUs) t hat m ay be used sim ult aneously, in t he sam e volum e of space, wit h ot her inst ances of m edium use( on ot her channels) by ot her inst ances of t he sam e physical layer ( PHY) ,wit h an accept ably low fram e error rat io( FER) due t o m ut ual int erference.
11N Wireless Broadband Rout er User Guide t he net work.WPA2 is t he second generat ion of WPA securit y and provides a st r onger encry pt ion m echanism t hrough Advanced Encrypt ion St andard ( AES) , which is a requirem ent for som e governm ent users. 8 0 2 ,1 x a u t h e n t ica t ion St at ic WEP key is difficult t o m anage for when you change t he key, you will have t o inform all ot hers, and if t he key is disclosed in one of t he places, t he key can no longer provide securit y.
11N Wireless Broadband Rout er User Guide Appe n dix 2 Pr odu ct Fe a t u r e s z Support s I EEE 802.11n, I EEE 802.11g, I EEE 802.11b, I EEE 802.3 and I EEE 802.3u st andards. z 5dBi high gain om ni- direct ional ant enna, wit h st rong signals and long t ransm ission dist ance.
11N Wireless Broadband Rout er User Guide z Support s WDS t o ext end wireless net work z Support s virt ual server, DMZ host z Provides syslog t o record t he running st at us of t he rout er Appe n dix 3 FAQ This sect ion provides som e solut ions t o t he problem s which m ay occur during t he rout er ’s inst allat ion or usage. The inst ruct ions below m ay help you deal wit h t he problem s. I f your problem is not in t he list , please log int o our websit e www.t enda.
11N Wireless Broadband Rout er User Guide t he Rout er ’s LAN I P address 192.168.0.1 ( open “ Com m and Prom pt ” and t ype “ Ping 192.168.0.1” and t hen ent er) . I f it is OK, please m ake sure your browser does not access t he I nt ernet by proxy server. I f t he ping fails, you can press t he “ RESET” but t on for 7 seconds t o rest ore t o default set t ings. And t hen repeat t he ping operat ion. I f it st ill does not work, please cont act us. 2 .
11N Wireless Broadband Rout er User Guide 1450 or 1400. 5 .H ow t o sh a r e m y com pu t e r ’s r e sou r ce w it h ot h e r u se r s in I n t e r n e t ? I f you want I nt ernet users t o access t he int ernal server via t he rout er such as: e- m ail server, Web, FTP. You can configure t he “ Vir t u a l Se r ve r ”. St e p 1 : creat e your int ernal server, m ake sure t he LAN users can access t hese ser vers and know relat ed ser vice port .
11N Wireless Broadband Rout er User Guide WEB Server TCP 80 FTP Server TCP 21 Telnet TCP 23 Net Meet ing TCP 1503、1720 File MSN Messenger TCP/ UDP Send: 6891- 6900( TCP) Voice: 1863、6901( TCP) Voice: 1863、5190( UDP) PPTP VPN TCP 1723 I phone5.
11N Wireless Broadband Rout er User Guide Appe n dix 4 Cle a r W ir e le ss Configur a t ion Cle a r W ir e le ss con figu r a t ion file u n de r w in dow s XP 1. Right click “ M y N e t w or k Pla ce s” on your com put er deskt op and select “ Pr ope r t ie s”. 2. Right click “ Wireless Net work Connect ions” and select “ Propert ies”.
11N Wireless Broadband Rout er User Guide 3. Click “ Wireless Net work Configurat ion” and clear t he corresponding wireless configurat ion file as shown below. Cle a r W ir e le ss con figu r a t ion file u n de r w in dow s 7 1. Right click “ Net work” and click “ Propert ies”.
11N Wireless Broadband Rout er User Guide 2. Click “ Manage wireless net works” on t he left side of t he window. 3. Delet e t he corresponding configured file in t he “ Manage wireless net works”.
11N Wireless Broadband Rout er User Guide 93
11N Wireless Broadband Rout er User Guide Appe n dix 5 Re gu la t or y I n for m a t ion EU D e cla r a t ion or D e cla r a t ion of Con for m it y Hereby, SHENZHEN TENDA TECHNOLOGY CO.,LTD, declares t hat t his Wireless Broadband Rout er is in com pliance w it h t he essent ial requirem ent s and ot her relevant provisions of Direct ive 1999/ 5/ EC.
11N Wireless Broadband Rout er User Guide - Connect t he equipm ent int o an out let on a circuit different from t hat t o which t he receiver is connect ed. - Consult t he dealer or an experienced radio/ TV t echnician for help. To assure cont inued com pliance, any changes or m odificat ions not expressly approved by t he part y responsible for com pliance could void t he user ’s aut horit y t o operat e t his equipm ent .