Instruction Manual

Shenzhen Tengtek
3
Product description
This product is a customized industrial touch all-in-one pc.The front frame is made of 6mm
aluminum alloy to prevent corrosion, the back shell is made of sheet metal, the heat dissipation
plate is made of high-performance aluminum alloy, and the machine is made of UV resistant
paint process. The machine adopts AG anti-glare glass, full fitting process, full Angle of view, wide
temperature LCD screen, with high performance and low power consumption processor, it has
high performance ，excellent display effect, and excellent heat dissipation performance brings
longer service life
The waterproof rating of the front panel is IP65, suitable for outdoor and semi-outdoor
applications. The rich interface design, excellent display effect and solid design of the machine
make it easy to cope with the harsh environment of the project application.
Operating environment
1. In order to prevent dirt, dust attached to the machine affect the display and touch
effect, the installation point should be far away from the dusty environment.
2. In order to prevent water mist, water droplets splashing in the machine, and resulting
in damage to internal parts, the installation place should avoid damp environment.
3. Try to avoid direct sunlight, can prolong the service life of the machine.
4. It is recommended that the installation place of the whole machine be in a ventilated
position, and a space of 10cm to 20cm should be set aside around the touch
all-in-one machine to maintain good ventilation;Operating temperature must be
between -10℃and 60℃.
5. Please ensure that the ground wire (E pole) of the power plug bar is properly
grounded when installing the machine.
6. Please make sure not to shake the machine strongly when installing the whole
machine.