Instruction Manual

Device Setup (EZ Mode)
1. Download the MOBI Smart App from the App Store or Google Play Store.
a. After installing the app, sign up/login to MOBI Smart.
2. Initiate Setup/Link Mode by holding the power button for 10 seconds until the LED indicators blink
slowly, then release.
3. Confirm you've connected your smartphone to your home Wi-Fi signal with a 2.4GHz connection.
a. Make sure to have your Wi-Fi password before proceeding.
4. On the MOBI Smart App, tap Add device , then select MOBI E.N.T. Otoscope .
5. Follow the setup steps outlined in the MOBI Smart App.
6. Android Users - your screen may display a notice that reads "mobile phone is connected to 5 GHz
Wi-Fi." If you are connected to a 2.4 GHz Network, please ignore this prompt and tap “
Carry On .”
7. After successfully connecting, edit your device name for easier management or change it later.
a. EZ mode only functions while connected to the 2.4 GHz Wi-Fi Network used during setup.
To use the device in EZ Mode:
1. Power on the otoscope and open the MOBI Smart App.
2. On the homepage, tap the otoscope in your device list, then tap the blue button to view the
camera feed.
Note: T
he otoscope includes a second operation method called AP Mode. It can provide a higher picture
quality for the device and grant users the ability to use the otoscope outside their home network.
Device Setup in AP Mode (Direct Hotspot HD Connection)
1.
After setting up device in EZ mode, ensure your otoscope is powered on.
2. On the otoscope's main screen, tap the settings ( ) icon in the top-right corner.
3. Once on the settings page, find Advanced Settings and tap on AP Mode .
4. Create a custom 8-digit password and tap Start AP Mode .
5. Tap Connect to be redirected to the main Wi-Fi settings on your phone.
6. Select the Wi-Fi signal that reads SL-MOBI WiFi-XXXX, then return to the app.
a. While connected in AP Mode, the otoscope temporarily disconnects your smartphone from
your home's Wi-Fi network.
b.
iOS Users - your screen may display a notice that reads “The Wi-Fi Network…[is] not
connected.” Ignore this prompt and tap “
Keep Trying Wi-Fi .”
7.
If your app displays a black screen, allow a few seconds for the otoscope to connect in AP mode.
To use the device in AP Mode:
1. Power on/ensure your otoscope is powered on. Then open your phone's Wi-Fi settings.
2. Ensure you are connected to the Wi-Fi signal that reads SL-MOBI WiFi-XXXX .
3. Open the MOBI Smart app, and in your list of available devices, tap open your otoscope.
4. Powering the otoscope off will reconnect your smartphone to its default Wi-Fi signal.
+
1(323)904-3000 www.getmobi.com
+
1(323)904-3000 www.getmobi.com
Device Setup in AP Mode
See instructions on back and follow steps to setup your device in AP mode.
Speculum
Used to cover the Camera/LED guide lights before entering the ear and prevent
injury/misuse.
Battery Indicator
Indicates battery life (ranging from 1-4) and connection status. Recharge the
device once the light indicator reaches 1 LED light.
Power Button
Press and hold the power button for 4 seconds to initiate the
device.
Camera/LEDs
Includes an HD Gyroscope camera and 6 LED guiding lights.
The MOBI Ear, Nose, & Throat Smart Wi-Fi Otoscope is a sleek and
reliable ear, nose, & throat camera tool with a 3.5mm diameter
lens and a rechargeable battery.
The MOBI Ear, Nose, & Throat Smart Wi-Fi Otoscope is
a sleek and reliable ear, nose, & throat camera tool with
a 3.5mm diameter lens and a rechargeable battery.
Extended Instruction Manual
Scan to find the most up-to-date Instruction Manual & Warranty Details.
If you experience issues setting up your device, contact support at
www.getmobi.com/gethelp or call us Mon - Fri, 8:00 AM – 5:00 PM PST.
4. Return to app
3. Select Hotspot
1. Create Password
2. Tap “Connect”
MOBI定制说明书 英文 215.9x279.3mm 105g哑粉纸 CMYK+2个专色 橙色1655C 灰色425C
工艺要求： 横折3次竖折1次 切记专色一定要对色卡:
橙色1655C 425C
D
igital Otoscope
D
igital Otoscope