User's Manual

13
call timer on the screen.
 Dial a call via phonebook: Enter the phonebook and search the
desired name/phone number, and then press dial key to dial call.
 Redial latest dialed number: In standby state, press dial key to
view the list of the latest dialed phone numbers or names. Roll
to the desired phone number or name and press dial key to dial
call.
Adjust Receiver Volume
In call conversation, press the up navigation key or down
navigation key to adjust the volume of the receiver.
Answer a Call
When there is a call, as per the settings of the mobile phone, you
will be alerted with ring only, vibration only, vibration and ring,
vibration then ring.
To receive a call, press Dial/Call Key.
To refuse a call, press Switch-on/off key or the end key directly.
If the CLI (Call Line Identity) is opened, the phone number of the
caller will occur on the screen. If this number has been saved in the
phonebook, the name corresponding to this number will be displayed
on the screen.
Send DTMF Signal
When this function is set, in call conversation, press the desired
number key and * key and # key to send DTMF signals to the other
party. If such function is inactive, then extension call will become
impossible.
Dial Hold
If you have applied for dial hold, in the call conversation process,
press “Options” to have the following function menus:
 Hold single call: Pause the current call but with the line keeping
connected.
 End single call: End the current call conversation.