User's Manual

14
navigation key to adjust the volume of the receiver.
Answer a Call
When there is a call, as per the settings of the mobile phone, you
will be alerted with ring only, vibration only, vibration and ring,
vibration then ring.
To receive a call, press Dial/Call Key.
To refuse a call, press Switch-on/off key or the end key directly.
If the CLI (Call Line Identity) is opened, the phone number of the
caller will occur on the screen. If this number has been saved in the
phonebook, the name corresponding to this number will be displayed
on the screen.
Send DTMF Signal
When this function is set, in call conversation, press the desired
number key and * key and # key to send DTMF signals to the other
party. If such function is inactive, then extension call will become
impossible.
Dial Hold
If you have applied for dial hold, in the call conversation process,
press “Options” to have the following function menus:
 Hold single call: Pause the current call but with the line keeping
connected.
 End single call: End the current call conversation.
 New Call: Enter the dial interface, dial another call.
 Phonebook: Enter the directory of the phonebook.
 Call history: Enter the directory of the call history.
 Messages: Enter the directory of SMS.
 Sound recorder: While having call conversation, you can record
the call.
 Mute: You can activate/inactivate the speaker.
 DTMF: You can set whether to send DTMF signals.
Note: Some menu items need the support of the local network or can
occur in special cases, such as Conference and New Call. Consult the