User's Manual
29
5.Basicoperation
Switchon
Press the switch‐on/off key to start the mobile phone, then
the screen will display switch‐on image. Then you can enter
Settings menu to set phone modes, including SIM1 & SIM2 On,
OnlySIM1On,OnlySIM2OnandFlight.ThedefaultedoneisOnly
SIM1On.
After insert SIM
card, the mobile phone will automatically
check the SIM card availability, and then it will be shown
informationasfollowingonthedisplaybysequence:
1.“Inputphonepassword”——Ifyouhavesetthepassword.
2.“InputPIN”——IfyousetSIMcardpassword.
3.“Noservice”—Indicatesfailtomake
registerandcannotmake
anycalls.
4. “Emergency calls only”—indicates has registered to other
networkandonlycanmakecallto112.
5.“Searching”—themobilephoneissearchingnetworkuntilfind
appropriatenetwork;
6.“Operatorname”—Indicatesnetworksuccessfullyregistered.
Note:If you do not know PIN code, please contact the network
serviceprovider.
Thedefaultedphonepassword“1234”.
30
Switchoff
Toswitchoffthe mobile phone,presstheendkey .Whenthe
screen displays switch‐off cartoon, the host and the slave wi ll be
offatthesametime.Donottakeoutthebatterytoswitchoffthe
mobilephone.Ifso,theSIMcardcanbedamagedeasilyand
some
datawillbelost.
DialaCall
With the number keypad, you can enter phone num bers (if
wrongcharactersareinput,presstheclearkeytodeletethem).
Pressthedialkeyto dialthephonenumber.InSIM1andSIM2
Onstate,youcanchoosetodialacallviaSIM1orSIM2.Toend
a call,
press the endkey; or to cancel a dial, pressthe Cancel
key or the switch‐on/off key. After the call is connected, you
canseethecalltimeronthescreen.
Dialacallviaphonebook:Enterthephonebookandsearchthe
desired name/phone number, and then press dial key to dial
call.
Rediallatestdialednumber:Instandbystate,pressdialkeyto
viewthe list of the latest dialed 20 phone number or names.
Roll to the desiredphonenumberor nameandpress dialkey
todialcall.