User's Guide

19
device label.
Note: You can customize the login that is used to access the AT&T Wi-Fi
Manager by going to System > Administration. If you have changed the login
and have forgotten the new one, you must restore the device to the factory
default settings. Using a narrow object, such as a paperclip or ballpoint pen,
press and hold the Factory reset button located at the bottom of your mobile
hotspot for ve (5) seconds. You may then log in using the default login
password printed on the device label located underneath the battery of your
mobile hotspot.
The AT&T Wi-Fi Manager includes a navigation panel on the left side of the
screen, which contains the following sections:
•Device information – Display general device information (see “Device
information” on page 26).
•Connected devices – View devices currently connected to your mobile
hotspot and block/unblock Wi-Fi devices from connecting (see “Connected
devices” on page 27).
•Wi-Fi – Customize your device’s Wi-Fi and security settings (see “Wi-Fi” on
page 28).
•Messages – View messages from AT&T about your service plan (see
“Messages” on page 33).
•Networking – Access a wide range of network and security settings (see
“Networking” on page 34).
•Parental control –
Control days and times a device can connect to the
Internet and limit the permitted websites (see “Parental control” on page 42).
•System – Manage system administration functions such as set Date/Time,
change Password, Factory reset, Reboot, etc. (see “System” on page 44).
•Software update – Display the current software version installed and check
for updates (see “Software update” on page 50).