User's Guide

22
Changing Wi-Fi network name and password
You can customize your mobile hotspot’s Wi-Fi network name (SSID) and
password using the AT&T Wi-Fi Manager.
1. On any device that is connected to the mobile hotspot, enter
http://attwimanager or http://192.168.1.1 directly into your browser
address eld.
2. Enter the login password found on the device label located underneath the
battery of your mobile hotspot.
3. Click LOG IN button.
4. Go to Wi-Fi > 2.4 GHz Wi-Fi > EDIT to change your network name and
password.
5. Click SAVE & APPLY.
Note: You will need to reconnect any connected Wi-Fi enabled devices to the
hotspot after updating any credentials.
Your mobile hotspot does not simultaneously broadcast 2.4 GHz and 5 GHz
Wi-Fi networks. The default Wi-Fi network is 2.4 GHz.
To change 5GHz Wi-Fi network name and password, follow the below steps:
1. Go to Wi-Fi > 5 GHz Wi-Fi > Enable to enable the 5GHz Wi-Fi network.
2. Click EDIT to change your network name and password.
3. Click SAVE & APPLY.
Note: Wi-Fi devices connected to 2.4 GHz Wi-Fi network will be disconnected
when you switch from the 2.4 GHz Wi-Fi to the 5 GHz Wi-Fi network.