User's Guide

30
•Channel: Display the wireless channel that the radio is operating on. In most
situations, leaving this as Automatic will work best, but you can manually
change the channel selection using this option.
•Width: When 802.11n is selected in mode, width option is displayed. You can
select 20MHz or 40MHz for this option. When 802.11ac is selected in mode,
you can select 20MHz, 40MHz, or 80MHz for this option.
Network name (SSID)
The wireless name that is displayed to client devices when they scan for
networks to join. You can enter your new network name in this eld to change
it. When nished, click the SAVE & APPLY button.
Broadcast SSID
When selected, your mobile hotspot name will be visible in the list of available
Wi-Fi networks when client devices scan for networks to join. If unselected, your
mobile hotspot name will be hidden and must be added manually on the
client devices to join. This checkbox is marked by default.
Password
The Wi-Fi network password that must be entered on any client devices
needing to connect to your mobile hotspot. You can enter your new password
in this eld to change it. When nished, click the SAVE & APPLY button.
Note: If you have changed the login and have forgotten the new one, you
must restore the device to the factory default settings. Using a narrow object,
such as a paperclip or ballpoint pen, press and hold the Factory reset button
located at the bottom of your mobile hotspot for ve (5) seconds. You may
then log in using the default login password shown on your mobile hotspot’s
Wi-Fi Info details screen.