User's Guide

40
•Protocol: Select ALL, TCP+UDP, TCP, UDP, or ICMP as the trafc types to be
ltered.
•Source ports: Enter the ports number that trafc will be ltered from.
•Destination ports: Enter the ports number to which trafc will be ltered.
•Action: Select Drop, Accept, or Reject to deny or allow the access to the
Internet.
When nished, click the SAVE & APPLY button.
Existing rules can be further edited by clicking the EDIT button to the end of
each rule entry.
You can also set the priority for the existing rules by clicking Up
and Down
icons.
VPN passthrough
This feature allows VPN client software on connected devices to connect
through this device to remote VPN servers. You can specify the VPNs allowed by
protocol.
Under normal operation, these should be left as Enabled.