User's Manual

7 8
Insert the pin into the hole and pull out the tray. Place the SIM
card or microSD card with the chip facing downwards on the tray,
and put the tray into its housing. Make sure that it is correctly
inserted. To remove the SIM card or microSD card, pull out the
tray.
Your phone only supports nano-SIM card. Do not attempt
to insert other SIM types like mini and micro cards;
otherwise you may damage your phone. Only FAT32 file
system is supported on the microSD card.
Charging the battery
To charge the battery, connect the charger to your phone and
mains socket. You can also charge your phone via a USB cable.
Your phone is battery embedded design with non-
removable battery or back cover. Unauthorised personnel
are strictly prohibited from disassembling the phone. To
reduce energy wastage, disconnect your charger from the
plug when the battery is fully charged.
To reduce your phone’s power consumption, switch off
Wi-Fi, GPS, Bluetooth or apps running in the background
when not needed. In Settings you can also lower the
brightness of the screen, and shorten the length of time
before the screen goes to sleep.
1.2.2 Power on your phone
Hold down the Power key until the phone powers on. It will take
a few seconds before the screen lights up. Swipe to unlock your
phone, or use the PIN, Password, Pattern if you have set this up
already.
If you do not know your PIN code or if you have forgotten it,
contact your network operator. Do not leave your PIN code with
your phone. Store this information in a safe place when not in use.
Set up your phone for the first time
The first time you power on the phone you will be asked to set
the following options: language, mobile data, Google account,
date & time, etc.
1. Select the phone’s language, and then touch LET'S GO.
2. Insert a SIM card or touch SKIP.
3. Select a Wi-Fi network, or touch SKIP and then CONTINUE.
4. Adjust Date & time if needed, then touch NEXT.
5. Read Google Services and then ACCEPT.
6. Touch SET UP to set up Face Unlock, or touch SKIP.
7. Protect your phone, set screen lock now or touch Not now and
then touch SKIP ANYWAY.
8. Touch the switch to disable/enable the improvement of your
phone by sending anonymous diagnostics and usage data,
learn privacy policy on data protection and software updates,
and touch NEXT.
9. Set font size, and touch DONE.
10. View the display size, adjust if needed, and touch DONE.
11. Read more warnings about this device before you using it,
then touch Done.
If you power on your phone with no SIM card inserted, you will
still be able to connect to a Wi-Fi network to sign into your Google
account and to use some features.