Operation Instruction

A: Please use a 2.4GHz wireless network. The device does not
support the 5GHz wireless network. Meanwhile, please set the Wi-Fi
authentication method to WPA2-PSK or other lower level of security
method. A password is required.
A: The built-in infrared lamp beads make the camera only show some
dim red lights when night vision is activated, but the image quality is
still clear under no light environment.
4.Q:What are the requirements for Wi-Fi?
A: After testing, the Wi-Fi connection distance can normally reach up
to 150 meters in the open area. However, the actual situation depends
on the strength of Wi-Fi and its surrounding environment (thick walls,
electromagnetic devices, large metal objects will all cause interference
to the Wi-Fi signals). If the camera connection signal is weak or
unstable, please place the camera as close to the router as possible.
A: If you set the duration as "Auto", when someone occurs in the view of
the camera, it will start recording a video for up to 3 minutes.
A: Click the icon in the upper left corner of the "Library" page to start
󽗉ltering videos by category. Select the category you want to see and
then click "Save" to view the video playbacks.
5.Q:How far should the camera be placed from the router?
6.Q:What is the maximum length of recording time?
7.Q:How to quickly view videos by category?
A: Long press the power bottom for 3 seconds to restart it. If there is no
response, you can remove the rubber plug at the button of the camera.
Press the reboot hole with a pointed object to restart the camera.
8.Q: What should I do when the device is in malfunction?