Operation Instruction

Firmware upgrade

FAQ

When you connect your camera through the App, it will prompt

you if the latest ﬁrmware is available. You can also manually

check the ﬁrmware upgrade in the settings of the App.

A: The built-in infrared lamp beads make the camera only show

some dim red lights when night vision is activated, ensure that

clear video can be taken in no light or low light environment.

Note : Please make sure that your camera is fully charged or

connected to the power adapter before upgrading the ﬁrmware,

please do not cut oﬀ the power supply during the upgrading.

Q: Will the camera show red lights when night vision

is activated?

A: Use the ethernet cable to connect without distance limitation.

If using a Wi-Fi connection. After testing, the Wi-Fi connection

distance can normally reach up to 150 meters in the open area.

However, the actual situation depends on the strength of Wi-Fi

and its surrounding environment (thick walls, electromagnetic

devices, large metal objects will all cause interference to the

Q: How far should the camera be placed from the

router?