VRN-65HB 2 DIN 6.2' Monitor DVD/CD/MP3/MP4 Player AM/FM Radio Support Bluetooth Support Mobile Phone link Build in GPS Owner’s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.
WARNING! To promote safety, certain functions are disabled unless the parking brake is on. The Unit is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of his connection may violate applicable law and may result in serious injury or damage. To avoid the risk of damage and injury and the potential violation of applicable laws, this unit is not for use with a video screen that is visible to the driver.
CONTENTS WARNING! ................................................................................................................. 2 OPERATION PRECAUTIONS .................................................................................... 2 CONTENTS ................................................................................................................ 3 ACCESSORIES ..........................................................................................................
ACCESSORIES Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) Mounting Strap 1 (3) Bolt 1 (4) Screw 4 (5) Mounting Collar 1 (6) Release Key 2 (7) Screw 1 (8) Rubber Cushion 1 Remote Control ISO cable Warranty card User Manual Trim ring GPS cable SD card Note: Product image may vary from the actual delivery.
INSTALLATION / UN-INSTALLATION Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driver’s way and will not injure the passenger in case there is a sudden stop, like an emergency stop.
WIRING CONNECTIONS Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord.
Connecting the reversing line to taillight on the car After connecting, when you start up the reverse gear, the unit will receive the picture from car rear view camera. Note: - Only use groundless loudspeakers. - Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers at higher volumes. - Use 4~8 (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.
FRONT PANEL 1. IR Sensor IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 2. EJECT Button Press to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is reinserted automatically. 3. VOL Increase˄+˅ Button Press VOL increase button to increase the volume. 4. Main Menu Press menu button enter to GPS mode. 5. VOL Decrease˄-˅ Button Press VOL decrease button to decrease the volume. 6. POWER/MUTE Button Press it to turn on the unit.
REMOTE CONTROL 1. POWER Power on or off. 2. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 3. PLAY/PAUSE button In DVD mode, press it to pause playback, press again to resume. 4. Mute/Root button : Short press this button to mute the volume output, press it again to resume volume. 5.
11. Cursor buttons Use the buttons to select the menu item, the title track or to show next frame. 12. SETUP button In DVD mode press it to enter the setup menu. 13. EJECT button Press it to eject the disc. 14. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 15. ANGLE/ACCEPT button (Only for Bluetooth) In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded DVD file or DVD disc that has this function).
26. OSD button In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup. (RED /GREEN /BLUE /BRIGHT / CONTRAST /SHARP /COLOR RESET /BACK) 27. VOL- button Press to decrease volume level. 28. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO.
MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by tapping on the touch screen buttons. Tap the icons to enter a desired mode. ƹ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Touch this button to go into home page. Return button.
ƹDVD PLAYER To start DVD Player, tap DVD icon from main menu screen. TOUCH SCREEN MENU In DVD mode touch it return to DVD menu. In VCD mode touch it can choose PBC ON or OFF. Touch it to skip to the previous track. Touch it to pause/play. Touch it to skip to the next track. Press it to repeat REP CH => REP TT => REP ALL. Touch it to select Subtitle 1/2=> Subtitle 2/2=> Subtitle off. Touch it repeatedly to change the viewing angle.
Press it to select songs. Press it to select move or video file. Press it to select pictures. Press it to search USB files. Press it to search song, move, and video or picture files. Press it to turn on / turn off track randomly playback. Touch it to skip to the previous track. Play/pause button. Touch it to skip to the next track. Press it to repeat REP CH => REP TT => REP ALL. Touch this button adjust the EQ, it can choose User =>Rock =>Pop=> Jazz=>Electric =>Flat => User.
Date Time 24-Hour Time :Turn on or of the 24 hour time. Set Automatically :Turn on or off automaticlly set dateand time. Time Zone:Press it can choose time zone. Navigation Navi Gain: Adjust Navi volume. Dissble media play when navigating: Turn on or off dissble media play when navigating. Auto run: Turn on or off the auto run map. Navi path: Press it can select the Navi path. Video Rear Camera Mirror: Turn on or off the rear camera mirror.
Radio Area Radio Area: Can choose radio area Asia, Japanese, Russian, North America and Middle East. GPS Information Radio Area: Can choose radio area Asia, Japanese, Russian, North America and Middle East. GPS SCETION To start GPS mode, please insert SD card in GPS slot on the front panel. Firstly tap SETUP icon on main menu and enter to Navigation setting; secondly choose Navigation path and return main menu; thirdly touch GPS icon on main menu or tap main button on the panel enter to GPS.
MOBILE PHONE LINK SCETION Note: Mobile phone link function can only be available: *Used for Android system phone. Do not support iphone till now. *Set your phone to debug mode. When start to operate phone link function, firstly set the phone to USB debug mode; connect the USB cable with mobile phone; then confirm your phone has already connected with unit via Bluetooth, and then tap Phone link icon on the main menu enter to Phone link mode.
Pairing Mode At the 1st time when using BLUETOOTH, you need to pair the mobile phone first.When a phone have not been paired with the unit, the BT icon and Pairing mark will blink continually on the panel. When the unit have connect with phone, the BT icon will turn on and the Mobile phone name (if available) will be display on the panel. According to mobile pairing device manual,after searching new device(SoundStream), select it, input password "0000" and confirm ok, device paring is finished.
AV IN MODE To start AV-IN Mode, tap on AV-IN button from main menu screen.Connect the external audio/video signal source to this unit. Select AV-IN mode in the main menu. Note: If there is no external video input, the TFT displays “Warning”. OTHER FUNCTIONS Subwoofer Connect the subwoofer to the unit using sub output (see electrical diagram). screen enter into main menu setting choose EQ, or touch mode set subwoofer ON to enable subwoofer.
NOTES ON DISC Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body. (GND). using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram.
TROUBLESHOOTING Symptom LCD CD General Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Remedy Fuse is blown In correct wiring Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. Nothing happens The microprocessor when buttons are has malfunctioned pressed. due to noise, etc.
TROUBLESHOOTING SYMPTOM NO POWER DISC CANNOT BE LOADED. CAUSE THE CAR IGNITION IS NOT ON. THE FUSE IS BLOWN. REPLACE THE FUSE. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. INSERTING THE DISC IN UPSIDE DOWN. DISC CANNOT BE READ. SOLUTION IF THE POWER SUPPLY IS PROPERLY CONNECTED TO THE CAR ACCESSORY SWITCH THE IGNITION KEY TO “ACC”.
TECHNICAL SPECIFICATIONS General Power supply: Current consumption: Maximum power output: 11~16V DC max. 10 A 4 x 50W channels (max) DVD/VCD//MP3/MP4/VIDEO/CDDA/PIC TURE CDCD-R/-RW/DVD±R/±RW PLAYBACK Compatible formats: Dimensions (W x D x H) / weight: 178*165*100 mm/2 kg Working temperature range: ESP function: -20ć - +60ć 10 sec. for Audio CD, 120 sec. for MP3 TFT display Screen size: Resolution: Aspect ratio: Brightness: Contrast ratio: 6.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.
