Product Card

Input voltage and current: 5V 2A

Output power: 5W

Sensing distance: 4mm

Inefficiency:>80%

Instructions:

1. Connect the external 5V 2A power supply to the Type-C input port of the product through the

USB-C charging cable, and the LED indicator blinks alternately red and green for 2 seconds and

then goes off.

2. When the mobile phone and other charged devices are involved, the green indicator light starts

to breathe and blink, indicating that the product is working on external output.

3. After the charged device is fully charged, the indicator turns off and you can remove the

charged device.

4. Card reading function: when the TF card is inserted into the card slot, connect the computer

with the product through the transmission line. The computer system will automatically identify

the external TF card and display it in the computer system in the form of U disk. USB

transmission type is USB2.0, and the actual transmission speed is about 30MB/s

PAGE 1
Input voltage and current: 5V 2A Output power: 5W Sensing distance: 4mm Inefficiency:>80% Instructions: 1. Connect the external 5V 2A power supply to the Type-C input port of the product through the USB-C charging cable, and the LED indicator blinks alternately red and green for 2 seconds and then goes off. 2. When the mobile phone and other charged devices are involved, the green indicator light starts to breathe and blink, indicating that the product is working on external output. 3.
PAGE 2
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.