User's Guide

Wireless Repeater KN1200AC User Guide
2
1.3.2 Button
WPS button on the front
Rset button on the side
Reset
Button
After pressing and holding the Reset button for more than 5 seconds, when the
Repeater LED blink quickly, the repeater will be restored to the factory settings. At
this time, you can release the button and the repeater will automatically reboot.
WPS
Button
Press the WPS button, and then press the WPS button of the main router, the
repeater will automatically connect to the main router via WPS. After the
connection is successful, the repeater LED will be on.