Wireless Repeater KN300 User Guide 1
Wireless Repeater KN300 User Guide table of Contents 1 INTRODUCTION ........................................................................................................................ 1 1.1 Brief Introduction ................................................................................................................ 1 1.2 Features ............................................................................................................................... 1 1.3 Appearance ........................
Wireless Repeater KN300 User Guide 1 Introduction 1.1 Brief Introduction KN300 is a wireless repeater specially designed for large houses by HongYu Technology Co., Ltd. It works in the 2.4GHz frequency band and provides a wireless rate of up to 300Mbps. It is your first choice for enhancing wireless signals and enjoying high-speed WiFi. 1.2 ⚫ ⚫ ⚫ ⚫ Features Working at 2.
Wireless Repeater KN300 User Guide 1.3.2 Button WPS button on the front Rset button on the side Reset Button After pressing and holding the Reset button for more than 5 seconds, when the Repeater LED blink quickly, the repeater will be restored to the factory settings. At this time, you can release the button and the repeater will automatically reboot. WPS Button Press the WPS button, and then press the WPS button of the main router, the repeater will automatically connect to the main router via WPS.
Wireless Repeater KN300 User Guide 1.4 Stickers 2 Use your mobile phone to configure repeater 2.1 Repeater settings Step 1 Plug the repeater into the power socket and wait for the WiFi LED to blink and the repeater is started. Step 2 Use your mobile phone to search for and connect to the wireless network of the repeater: KN300_XXXXXX.
Wireless Repeater KN300 User Guide Step 3 After a while, the phone will automatically jump to the management page of the repeater; if not, please open the browser and enter "192.168.19.1" in the address bar to log in manually.
Wireless Repeater KN300 User Guide Step 4 After entering the management page, we click [START] to configure.
Wireless Repeater KN300 User Guide Step 5 After the repeater automatically searches for the surrounding WiFi, select the wireless network that needs to be extended. Such as HYLink_MK600_2.4G.
Wireless Repeater KN300 User Guide Tips: If the WiFi Name of the router to be extended is not in the list, please click [Refresh]. Step 6 If the WiFi to be extended is encrypted, please enter its wireless password. You can check [Set Repeater WiFi] to modify the wireless name of the repeater and set the password of the repeater. If not checked, the name and password of the repeater will be the same as the main WiFi. After inputting, click [Next].
Wireless Repeater KN300 User Guide ⚫ Scenario 2: Check [Set Repeater WiFi] 8
Wireless Repeater KN300 User Guide Step 7 The preview page after the setting is completed can help you confirm the previous input content. If the confirmation is correct, click [Finish Settings] to apply setting. If the Repeater LED light on, it means the extend is successful.
Wireless Repeater KN300 User Guide Complete Exit the browser, connect to the wireless name of the repeater, enter the wireless password, and you can go online. ⚫ The wireless name and password of the repeater: set in Step 6, if not set, it is same with the extended main WiFi. ⚫ If you need to configure the Repeater again, please reset the repeater to the factory setting, and then configure it according to the first configuration method.
Wireless Repeater KN300 User Guide 3 Set up a repeater using a PC 3.1 First Repeater settings Step 1 Plug the repeater into the power outlet and wait for the WiFi indicator to blink and the repeater is started. Step 2 Use a PC to search for and connect to the wireless network of the repeater: KN300_XXXXXX. Step 3 Open the browser and enter "192.168.19.1" in the address bar to log in manually.
Wireless Repeater KN300 User Guide Step 4 After entering the management page, we click [Repeater] to configure. Step 5 After the repeater automatically searches for the surrounding WiFi, select the wireless network that needs to be extended. Such as HYLink_MK600_2.4G.
Wireless Repeater KN300 User Guide Tips If the name of the router to be Extended is not in the list, please click [Refresh]. Step 6 If the wireless WiFi to be extended is encrypted, please enter its wireless password. You can check [Set Repeater WiFi] to modify the wireless name of the repeater and set the password of the repeater. If not checked, the name and password of the repeater will be the same as the main WiFi, and then click [Apply].
Wireless Repeater KN300 User Guide Step 7 Click [Apply] to complete the setting. Wait for the repeater application to take effect. If the Repeater LED light on, it means the extend is successful. Complete Exit the browser, reconnect the wireless name of the repeater, enter the wireless password, and you can go online. ⚫ The wireless name and password of the repeater: set in Step 6, if not check, the name and password of the repeater will be the same as the main WiFi.
Wireless Repeater KN300 User Guide Step 2 Set the computer's IP address:192.168.19.2。 Step 3 Open the browser and enter "192.168.19.1" in the address bar to log in manually.
Wireless Repeater KN300 User Guide 3.2.1 Status After the repeater setting is completed, log in to the [Status] page of the repeater, and you can view the repeater status and running status of the extend. 3.2.2 Repeater Enter the [Repeater] page, you can set the Extend again. 3.2.3 LAN Enter [LAN] page, you can configure LAN information.
Wireless Repeater KN300 User Guide 3.2.4 Wireless Enter the [Wireless] page, you can configure the WiFi information of the repeater. 3.2.5 Advance Enter the [Advance] page, you can Reboot, Reset,and Upgrade the firmware of the repeater.
Wireless Repeater KN300 User Guide 18
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
