Operation Guide

- 19 -
prong for pets with shorter coats of hair. Then
simply press the On/Off button on the
Receiver Collar to turn the collar on.
V. Set the boundary width and test the
Receiver Collar: Rotate the knob of the
Boundary Control Switch to adjust the width of
the Warning Vibration Zone and Static
Correction Zone. Set the Boundary width as
wide as possible to give your pet the widest
Warning Zone and Correction Zone possible.
To test the Receiver Collar, make sure the
collar is first powered on. Hold the Receiver
Collar at your pet’s neck level and walk toward
the Boundary Wire with Contact Prong
pointing up until the Receiver Collar vibrating.
If the Receiver Collar does not vibrate at the
desired range, simply turn the Boundary
Control Switch Knob clockwise to increase the
Boundary Width or counterclockwise to
decrease the Boundary Width. Repeat this