Operation Guide

- 32 -
screen comes on. Release the button,
and now the transmitter is power on.
If you want to match the 1st dog , please
choose first dog ,The LED display “1”
If you want to match the 2nd dog , please
choose the second dog , the LED
display “2”
Step 3 : Press and hold the Vibration button
and Highlight Led button at the
same time .until The LED display is
“P”. Not to release the two buttons.
Step 4 : Hold the transmitter close to the
unmatched receiver 1 to 2inches away.
After hearing 5 “beeps” sound from
the receiver and you see the green
LED flashing slow down to once every
5 seconds, you release the button. It
should connect pretty fast.