Users Manual

consequently move upward to the top left corner.
the N-shaped curve from top to bottom.
3. The robot will stop nearby the starting place when finish cleaning work.
2. After reaching the top left corner, it will start to clean the glass by moving
and upward to detect the friction, then move to the left frame of glass and
frame, press the start button, the product will automatically move downward
1. Put the product at the center of glass where is far away from the window
Cleaning path by pressing X1 button of remote
Cleaning path by pressing X2 button of remote
1. Put the product at the center of glass where is far away from the window
the N-shaped curve from top to bottom.
3. The robot arrived at the top right corner when finished N-shape cleaning,
4. The robot will stop nearby the starting place when finish cleaning work.
and upward to detect the friction, then move to the left frame of glass and
then move in Z-shape curve from top to bottom.
frame, press the start button, the product will automatically move downward
2. After reaching the top left corner, it will start to clean the glass by moving
consequently move upward to the top left corner.