User's Manual

ManualsBrandsShenzhen Uniwisdom Technologies ManualsElectronicsWIRELESS PERSONAL IN-EAR MONITOR SYSTEM (RECEIVER)

System Features

•100 selectable UHF frequencies for

interference-free performance. (Up to 8

systems can operate simultaneously).

•System consists of PEM-1000T

transmitter and one bodypack PEM-

1000R receiver, both of which offer 100

channels user select-ability. Any number of

additional receivers can also be operated

with the same transmitter if they are all

set to the same channel.

•AUTO-SCAN on receiver unit for easily

locating clear channels or manually

choosing Group/Channel on transmitter

•IR (Infrared) synchronization both ways

interface between receiver and transmitter

•User-friendly menu operation with more

control options shown in LCD display

•Proprietary companding circuitry for wide

Dynamic Range and clear, natural sound

•Operating Range: Up to 500 feet typical

(depending on site conditions)

•Rugged, foam-padded traveling case

provides easy, safe transport and storage

PEM-1000T Transmitter

•Rugged, all metal half-rack that can be

rack mounted singly or side-by-side with

optional rack kits

•Front panel features stereo headphone

monitor output jack and volume control,

select button for choosing one of 100

UHF channels, Left/Right 5-segment audio

input level displays, LCD channel display,

and IR SYNC to system receivers

•Back panel provides BNC jack for the

detachable antenna, a combo 1/4” TRS

unbalanced, and balanced XLR jacks for

Left and Right Line inputs, Left and Right

1/4” TRS unbalanced loop outputs

•Externally powered by AC-DC power

adapter

PEM-1000R Receiver

•Portable bodypack receiver features a

power switch switchable with built-in

volume output level control, select button

for choosing one of 100 UHF channels,

LCD channel display, stereo/mono, Signal/

Low Battery LED indicator.

•Receiver has AUTO–SCAN for ﬁnding

an open channel and IR SYNC to system

transmitter

•Handy Mute Button for muting audio if

desired during use

•Operates up to 8 hours (depending on

volume) on 2x1.5V AA alkaline batteries

•Each receiver is supplied with a pair of

miniature, lightweight (yet powerful)

in-ear speakers with soft rubber mounts,

designed for “custom” form-ﬁtted comfort

and optimum acoustic transfer and

isolation.

•Rear clip can be rotated 180˚ for attaching

receiver either vertically up or down

position.

Cautions During Operation

1. When this in-ear wireless monitoring system is used together with a wireless

microphone system, make sure they are not on close frequencies to avoid their possible

interference with each other.

2. If using a coaxial cable to connect the transmitter to a remote antenna, note that the

coaxial cable must be 50 and less than 5 meters long for optimum operating range.

3. Maintain line-of sight-operation at all times, when possible, for best performance and

range.

4. For best performance use only the supplied power adapter for the transmitter.

5. If using earphone other than those supplied, make sure they have a sensitivity of at

least 110dB/mW. Note that the receiver’s battery life diminishes as earphone volume

is increased or earphones have low sensitivity, which requires more power to drive to a

desired volume.

6. Always remove batteries from receiver if not using them for a long time as leaking

batteries can damage the unit.