LED RGB Light Strip User Guide
English Smart inside, splendid outside Manufacturer: Shenzhen Ustellar Technology Ltd. (shen zhen shi you shi tuo ke ji you xian gong si) Address: Rm.C306, 3/F,C Bldg., Youth Entrepreneur Hub, Jianshe East Rd.
English Smart inside, splendid outside LED RGB Light Strip User Guide THANK YOU for choosing Novostella. To op�mize user experience, please use the product according to the following instruc�ons. Warning (1) Winding ligh�ng is prohibited, as it affects heat dissipa�on and might cause dangers. (2) Please unroll the light strip from the plate before ligh�ng it up.
English Smart inside, splendid outside 1. Specifica�on P/N NTS22A-RGB-US-NF Model NTS22A-RGB-US-NF Wa�age 9W Color RGB Total Length 20� / 6m 5050 LED Type LED Quan�ty 168 LEDs Input Voltage 100-240V AC Frequency Luminous Flux 50/60Hz 38lm/m (Red: 6lm/m Green: 25lm/m Blue: 7lm/m) Adapter 12W(24V0.
English Smart inside, splendid outside P/N NTS28A-RGB-US-NF Model NTS28A-RGB-US-NF 18W Wa�age RGB Color Total Length 40� / 12m 5050 LED Type LED Quan�ty 336 LEDs Input Voltage 100-240V AC Frequency Luminous Flux 50/60Hz 38lm/m (Red: 6lm/m Green: 25lm/m Blue: 7lm/m) Adapter 24W(24V1A) Working Voltage 24V Working Temperature Restric�on Ba�ery Type -25°C~40°C IP20, Indoor Use Only, DRY LOCATIONS ONLY CR2025 (for RF remote controller) Package Includes Light Strip x 1, RF Remote Controller
English Smart inside, splendid outside 2. Components Light Strip RF Remote Controller Power Adapter LED Signal Receiver NTS22A-RGB-US-NF NTS28A-RGB-US-NF Note: Power Adapter Cord - type Z a�achment. For type Z a�achment: The cable or cord cannot be replaced without breaking or destroying the luminaire.
English Smart inside, splendid outside LED Signal Receiver Access Port for 12V DC Power Adapter 4-Pin Access Port for Light Strip 6
English Smart inside, splendid outside RF Remote Controller Pause/Play Brightness +/- On/Off Singular Color Music Modes DIY Colors Speed +/Dynamic Mode One-to-One Se�ng① One-to-Many Se�ng② Many-to-Many Se�ng ③ 7
English Smart inside, splendid outside Dynamic Mode There are 6 preset dynamic modes, and their speed can be adjusted with the “QUICK”or”SLOW” bu�on. 1. JUMP3: Flash and loop among 3 colors (Red, Green, Blue). 2. JUMP7: Flash and loop among 7 colors (Red, Green, Blue, Yellow, Purpple, Cyan, White). 3. FADE3: Fade and loop among 3 colors (Red, Green, Blue). 4. FADE7: Fade and loop among 7 colors (Red, Green, Blue, Yellow, Purpple, Cyan, White). 5. FLASH: Flash on white color only. 6.
English Smart inside, splendid outside Three Se�ngs There are three flexible se�ngs for the remote controller(s) to control the light strip(s) as per your ligh�ng project, One-to-One Se�ng, One-to-Many Se�ng and Many-to-Many Se�ng. You can choose either which light strip and how many light strips one controller controls, or which controller and how many controllers control the light strip(s). ① One-to-One Se�ng: One remote controller can only control one light strip.
English Smart inside, splendid outside ③ Many-to-Many Se�ng: If you have many light strips and remote controllers, and hope that any of the controller can control all the light strips, you could choose the ‘Many-to-Many’ Se�ng. Turn on each remote controller and power on its LED Signal Receiver. During the first 5 seconds, immediately long press the bo�om right bu�on on the remote controller �ll the strip light blinks.
English Smart inside, splendid outside 3. Installa�on 1. How to cut the LED strip? Before cu�ng the LED strip, please keep these in mind. (1) Once the strip is cut, an extra connector is needed for reconnec�on, otherwise the rest part being cut can not work. The connector is not included in the package. You may contact the seller for the connector details. (2) Double confirm the length for installa�on before making the cut. (3) Cut the strip along the marks. Connector Needed (Not Included) 2.
English Smart inside, splendid outside NO Rough Plas�c Surface NO Frosted Glass (2) Sweep the dust off the surface. (3) Tear the back sheet. (4) Press the strip with force. (5) Fasten the strip with clips, if applicable. (It is recommended to use the clip every 0.5m.
English Smart inside, splendid outside (6) Connect the light strip 1 to controller cable 2 , and then connect controller cable to power adapter 3 . Plug the adapter into the socket and turn on the light strip by pressing ‘ON’ bu�on on the RF remote controller. 2 1 3 Note: (1) If the strip can’t light up a�er the installa�on, please check whether the joints are connected correctly. (2) Please make sure to turn off the power supply during rou�ne maintenance.
English Smart inside, splendid outside 4. How to control the light strip? 4.1 Download the App Lotus Lantern by scanning the QR code below. This App is compa�ble with Android 4.0 and iOS 8.1 or above. Download APP 1: Scan the QR code from the label or user manual. The APP is compatible with Android 4.0 and IOS 8.1 and higher version. 4.2 Power on the light. 4.3 Ac�vate the Bluetooth func�on on your phone and open the App to automa�cally connect to the light. 4.
English Smart inside, splendid outside 15
English Smart inside, splendid outside FCC ID(Remote Controller): 2AWON-NTS-RGB-RF FCC ID(BT Signal Receiver): 2AWON-NTS-RGB-BT Any Changes or modifica�ons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.