Specifications
Table Of Contents
- 1
- Applying development of unilateral communication
- Serial port intercommunication agreement
- Summarize
- Control command format of serial
- Set BaudRate
- Get Reader Version
- Set Relay
- Get Relay
- Set Output Power
- Set Frequency
- Read Param
- Set Param
- Read Auto Param
- Set Auto Param
- Select Antenna
- Restore factory settings
- Reboot
- Start/ stop automode
- Clear Memory
- Set Reader Time
- Get Reader Time
- Set Report Filter
- Get Report Filter
- Set Reader Network Address
- Get Reader Network Address
- SetReader MAC
- Get Reader MAC
- Report Now
- Get Tag Info.
- GetReaderID
- Command format of serial read-write tag
- Collection of operation command
- Electronic tag storage area and notes
- SDK software development
- SDK compose
- Design introduction
- Basic constant and figure
- Constant definition
- API function return code
- Data type definition
- Parameter figure in reader
- Function return code
- Control command function
- Connect reader
- Disconnection
- Set baud rate
- Read version
- Set output power
- Set operation frequency
- Read reader basic operation parameter
- Set reader basic operation parameter
- Read reader auto parameter
- Set reader auto parameter
- Select antenna
- Set relay state in reader
- Reboot reader
- Set time
- Get time
- Get record
- Delete all records
- Network command
- Set IP address for reader
- Get IP address in reader
- Set reader MAC address
- Get reader MAC address
- Read write ISO18000-6B function
- Identify tag ID number
- Identify selected tag ID number
- Read data block
- Write data block
- Slow write data block
- Set write protection
- Read write protection
- Read write ISO18000-6C function
- Identify EPC number of ISO18000-6C tag
- Read a block data
- Write a block data
- Set read write protection state
- FCC警告语大于20cm(1)
SDK software development | VI-88R development handbook
{"00---FCC(American)", 63, 400, 902600},
//(0),{"00---FCC(American)", 50, 500, 902750},
{"01---ETSI EN 300-220(Europe300-220)", 11, 200, 865500},
//(1),{"01---ETSI EN 300-220(Europe300-220)", -1, -1, -1},
{"02---ETSI EN 302-208(Europe302-208)", 4, 600, 865700},
//(2)
{"03---HK920-925(Hong Kong)", 10, 500, 920250},
//(3)
{"04---TaiWan 922-928(Taiwan)", 12, 500, 922250},
//(4)
{"05---Japan 952-954(Japan)", 0, 0, 0},
//(5)
{"06---Japan 952-955(Japan)", 14,200, 952200},
//(6)
{"07---ETSI EN 302-208(Europe)", 4, 600, 865700},
//(7)
{"08---Korea 917-921(Korea)", 6, 600, 917300},
//(8)
{"09---Malaysia 919-923(Malaysia)", 8, 500, 919250},
//(9)
{"10--China 920-925(China)", 16, 250, 920625},
//(10)
090909RevA|Page 68 of 97