Technical Specs
Bluetooth Earphone
MUSIC
x1
x1
x1
Charging the
Bluetooth Earphone
Washing instruc�on&removal of electronics
-4-
MUSIC
LED Status Color
Red:Charging
Blue:Fully Charged
USB PC
or
Please note that you MUST remove the control panel & speaker before washing your
Bluetooth Headband
How to Removing the control panel & speakers
Step 1 The control
panel is held in a pocket
between a double layer
inside the Headband.You
can gently ease the control
panel out of its pocket.
Step 2 You will see a
small opening at the
rear of the Bluetooth
Headband
ease the control panel
towards this opening.
Step 3 Repeat step 1
speaker located at the
opposite side of
the Bluetooth Headband.
Precau�ons
Do not expose Headband to liquid or moisture.
Remove the Bluetooth module before washing the Headband.
Do not store the Headband near acidic or alkaline material.
Once the electronics are completely removed:
Machine wash cold,air dry (Do NOT tumble dry).
Made in China
滚滚长江东逝水
Volume Down / Previous Track
LED Status Light
Answer / Siri
Volume Up / Next Track
Charging Port
At a Glance
Features
Specifica�ons
Turning On/Off
Bluetooth Earphone
Built-in microphone for answering or calling.
Universal micro-USB cable.
MUSIC
MUSIC
Press and Hold for 4 Seconds
-2-
Pairing
Bluetooth Earphone
Control
-3-
MUSIC
Music Headband
Turn on Bluetooth
on devices
Turn on
Music Headband
Connect to Music
Headband on devices
LED Status Color Meaning
Pending to be Paired
Connected to a device
connect to the last connected device if avaiable .if no previously
3s
x1
x1
x1
Play/Pause Music
Volume Up/Down
Next Track
Previous Track
Press and hold
for 3 seconds
Press once when
connected to a device
Press and hold
during music playing
Press once duning
music
playing
Press once during
music
playing
x1
x2
Answer/End
Phone Call
Siri
Press once when
phone ringing
Quickly press twice
MUSIC
x1
x1
Bluetooth Earphone
TECHNICAL SPECIFICATION
Plug and play
Audio lnput:Universal 3.5mm Audio Jack
How to remove the Speakers
Step 1 The
headset
is held between a double layer inside the
Headband. You can gently take the speakersout of its
pocket.
Step 2 You will see a small opening at the rear of the Headband.
Precau�ons
Do not expose Headband to liquid or moisture.
disassembling or opening.
Remove the headset module before washing the Headband.
Do not store the Headband near acidic or alkaline material.
Once the electronics are completely removed:
Machine wash cold,air dry (Do NOT tumble dry).
Warranty
12-Month Warranty and friendly customer service.
Made in China
-4-
-2-
-3-
opposite side of the Headband.
x1
x1
Bluetooth Earphone
TECHNICAL SPECIFICATION
Plug and play
Audio lnput:Universal 3.5mm Audio Jack
How to remove the Speakers
Step 1 The
headset
is held between a double layer inside the
Headband. You can gently take the speakersout of its
pocket.
Step 2 You will see a small opening at the rear of the Headband.
Precau�ons
Do not expose Headband to liquid or moisture.
disassembling or opening.
Remove the headset module before washing the Headband.
Do not store the Headband near acidic or alkaline material.
Once the electronics are completely removed:
Machine wash cold,air dry (Do NOT tumble dry).
Warranty
12-Month Warranty and friendly customer service.
Made in China
-4-
-2-
-3-
opposite side of the Headband.
迅捷PDF编辑器
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction
FCC ID: 2AZIWHF001