User's Manual

English
2
Introduction
The smart PIR motion sensor detects movement
and send real-alert notication to smartphone.
Requirement to use
1. Tuya smart app
2. Tuya zigbee gateway (not included)
Installation
1. Pull the insulation sheet from battery
compartment of the PIR motion sensor.
2. Set up the PIR motion sensor with Tuya smart
app.
3. Make sure the PIR motion sensor is in the
range of Zigbee gateway's signal.
4. It is recommended to install the PIR motion
sensor at 2.2m height. It's detection angle is
110°, detection distance is up to 6 meters.
5. Attach the PIR motion sensor to wall with
provided screws (Machining 4 mm screw hole
with screw driver on PIR motion sensor and
6 mm hole in the wall, and insert expansion
sleeves into the wall) or double-sided
mounting tape.
R7046 PIR User manual_Size 68x104mm_100g双胶纸_骑马钉_中性.indd 2 2020/6/29 10:14:16