Installation Instructions

Speaker Button Operation and

Port Function

Wireless speaker USB port can be used for emergency charging

of mobile phones or Tablet computer.

Functions after TWS connection: Operation synchronization of two

speakers(does not contain power button).Press the buttons on one

of the speakers to achieve the same effect on the other speakers，

the buttons include (+/-/ volume/Previous/Next/Play/pause).

Power button: Long press to turn it on, a beep will appear, and

the indicator light will be blue. Long press the power button again,

a beep will appear, the indicator light will go out, and the power

will be turned off.

The default bass function is turned on. Press the TWS button for

3 seconds. After hearing the beep, turn off or turn on the bass

function.

USB

flash disk

PAGE 1
The default bass function is turned on. Press the TWS button for 3 seconds. After hearing the beep, turn off or turn on the bass function. Speaker Button Operation and Port Function Power button: Long press to turn it on, a beep will appear, and the indicator light will be blue. Long press the power button again, a beep will appear, the indicator light will go out, and the power will be turned off. Wireless speaker USB port can be used for emergency charging of mobile phones or Tablet computer.
PAGE 2
After booting, the indicator light flashes blue quickly. Thewireless speaker is successfully connected, and the indicatorlight flashes blue slowly. Insert the TF card/USB /AUX cable theindicator light flashes green quickly. While charging，plug in thechargingcable, the indicator light will be red without flashing,and theindicator light will be off when the battery is fullycharged. Whenthe wireless speaker is running low power , theindicator lightflashes red quickly (accompanied by a short beep).