User's Manual

Recommended separation distances between portable and mobile RF

communications equipment and the device

The device is intended for use in an electromagnetic environment in which radiated

RF disturbances are controlled. The customer or the user of the device can help

prevent electromagnetic interference by maintaining a minimum distance between

portable and mobile RF communications equipment (transmitters) and the monitor

as recommended below, according to the maximum output power of the

communications equipment.

Rated max.

output power

of transmitter

(W)

Separation distance according to frequency of the

transmitter (m)

150 kHz - 80 MHz

Pd 2.1

80 MHz - 800

MHz

Pd 2.1

800 MHz - 2.5

GHz

Pd 3.2

0.01 0.12 0.12 0.23

0.1 0.38 0.38 0.73

1 1.20 1.20 2.30

10 3.80 3.80 7.30

100 12.00 12.00 23.00

For transmitters rated at a maximum output power not listed above, the

recommended separation distance d in metres (m) can be estimated using the

equation applicable to the frequency of the transmitter, where P is the maximum

output power rating of the transmitter in watts (W) according to the transmitter

manufacturer.

Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency

range applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures, objects and

people.