User's Manual

Wireless Lavalier Microphone
System Instructions
Application: Ideal for Vlogging, Youtube Video,
Interviewing, Recording, Teaching etc..
Wireless Connection: 2.4GHz frequency support long
distance transmission without wired constraint.
Super Noise Reduction: Advanced Built-in DSP
reduces the noise effectively, and delivers more clear and
natural sound.
Digital Display: 3 LCD display screens help you have
better control of Microphone.
One Drive Two Design: 1 x Receiver, 2 x Transmitter , s
Convenient for interview.
1. Please use this product after it is fully charged for
the first time.
2. If the product is not used for a long time (more than
60 days), it needs to be charged.
3.Do not disassemble the machine, otherwise it may
cause damage for the product.
4. Do not use this product in thunderstorm weather.
5. To ensure personal safety, do not use it during
driving.
Product Certification:
8 . I n c a s e o f u n s u c c es s fu l p ai r in g , pr e ss t h e
transmitter ON/FF for 5 times (power on), transmitter will
cancel all previous information and start pairing again.
4. Mute Function; Press ON/OFF for 1 second at the
transmitter, microphone turn off the recording function
temporarily, then press the ON/OFF again could restore
the recording as before.
1. Power: Press the power button for 3 seconds to start
the microphone.
3. Install: Connect the receiver with the phone &
camera with cable, then open the live broadcast APP to
start recording.
9. If microphone crashed, press ON/OFF to reset the
machine.
6. Volume adjustment: Press the key + for louder
voice, and press key - for lower voice.
5. Noise Reduction: Press ON/OFF at the transmitter
twice, and LCD screen will show ENC which indicates noise
reduction function is on. Press the ON/OFF key twice
again, and the noise reduction function is off.
7. Charging: Use 2 in 1 USB Cable for charging. You
could know the battery status from LCD display screen.
2. Pair: Automatically pairing when power on. Then,
receiver LCD display screens will show signals of 2
transmitters(A-TX1&B-TX2), battery status and volume. 2
transmitters LCD display screen show up battery status,
volume and noise reduction signals.
OPERATING WARNING SPECIFCATIONS
DC3.3-4.2V
2.402GHz～2.480GHz
Back to Back 50M
4h
300mAh
·Working Voltage:
·Signal Transmission:
·Transmission Distance：
·Working Time:
·Battery Capacity:
·Charging Current： 300mA
·Charging Time: ≤2h
·Net Weight(Transmitter)： 23±1g
·Net Weight(Receiver)： 24±1g
·Working Temperature: -10℃-50℃
PACKING LIST
PRODUCT
1. Transmitter
Volume
Battery Status
Noise Reduction Status
ON/OFF
VOL+
VOL-
Mic Jack
MI C
Charging Port
Tra n s m i t t er： 2PC S
Rec e i v e r： 1PC S
Ins t r u c t i on： 1 P CS
Typ e Cin 1 US B C a b l e： 1PC S
2. Receiver
Volume
Ba t t er y S t atu s
No i s e Re d u cti o n Sta t u s
Vol+
Vol-
Mi c J a ck
MI C
Ch a r gi n g P ort
Battery Status
Noise Reduction Status
Volume
Headphone Output
VOL+
VOL-
ON/OFF
Charging Port
FEATURES
Transmitter: 2PCS
Receiver: 1PCS
User Manual: 1PCS
2 in 1 USB Cable: 1PCS
Charging Cable: 1PCS
.1.
.2.
.3.
.4.
.5.
Type Ciphone Charger
Lightning Cable：
1PCS
Lavalier Microphone 2PCS:
1PCS3.5mm TRRS Cable(phone)
PCS3.5mm TRS Cable(camera) 1
2PCSFurry Windshield:
Made in China
K63
FCC Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.