User's Manual

Manual
Manufacturer:Shenzhen Weijian Plastic Product Co.,Ltd
Address:Shangpai Industrial Park ,Shiyan Township,Baoan
District,Shenzhen,China
Model:W6010RF2.4G,W6011RF2.4G,JK-WR0612-S1,JK-WR0512-S1
Trade：N/A
⑴Package Contents
2.4GWireless keyboard
1.5V AAA battery
Instructions / certificate
Note: If you find discrepancies package, please return the dealer
⑵Installation Steps:
Installation Receiver
1.If it is a laptop, you can plug the receiver directly in the port USB.
2.If a desktop computer, we recommend that you extend the line through the USB, the
receiver plugged into a countertop, so will reduce the impact of the external
environment.
3.Installation keyboard
Open the keyboard at the bottom of the battery cover, press the battery positive and
negative inner recesses into the battery, one AAA battery into the keyboard and after
slide the power switch, at this time LED red light, replace the battery cover, you can
use
⑶Remarks/
Troubleshooting
If the keyboard does not work, you should use the following methods to troubleshoot
1、Check that the power switch is turned on
2、Determine whether to put on the positive and negative battery or battery has power
3、Check that the receiver is properly plugged into the computer USB port
4、After determining the receiver into, whether it is the computer to recognize

CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The EUT In accordance with the R&TTE directive 1999/5/EC.
Don’t placing the product on more than 25 ℃ or below -5 ℃ environment.