USB Wireless Smart Touch Keyboard Model #: W9824RF User’s Manual PID # 121375-109303 Rev.
All brand name and trademarks are the property of their respective owners USER’S RECORD: To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user’s manual.
PACKAGE CONTENTS: Your new Keyboard will ship with the following items: - USB Wireless Smart Touch Keyboard - Mini Receiver - 2 AAA Batteries - User’s Manual & Warranty Info.
BATTERY INSTALLATION 1. Press and slide the Battery Compartment Cover Release Latch at the bottom of your keyboard to remove the Battery Compartment Cover from your keyboard. 2. Install two AAA batteries into your keyboard following the battery orientation guide in the battery bay. 3. Replace the Battery Compartment Cover back onto your keyboard until it securely locks.
CONNECTING TO A COMPUTER: NOTE: The pictures shown in this User’s Manual are for demonstration purposes only. Your computer or product may look slightly different. 1. Plug the USB connector of your keyboard into an available USB port on your computer. 2. Turn on your computer. 3. Your computer will detect and install the necessary drivers automatically. 4. Your new keyboard is now ready to be used.
USING TOUCHPAD: The built-in touchpad supports Multi-touch function. Below are the functions of the touchpad.
WARRANTY INFORMATION: Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
