User's Manual

ManualsBrandsSHENZHEN WEIKING TECHNOLOGY ManualsAudio EquipmentBLUETOOTH SPEAKER

User Guide

Accessories:

1. Micro USB Cable ( for charging )

2. 3.5mm Audio cable ( AUX-in cable )

3. User Manual

Highlights :

BT19S is a compact Bluetooth speaker that can be wirelessly connected to Bluetooth

devices such as smartphones, tablets and computers to playback any music collection

stored on them. Thanks to its powerful battery, the system delivers full stereo sound,

separate from any mains supply, for up to 4-7 hours and is the perfect companion for the

park, whilst camping or on the beach. Process control, can get rid of complicated

connections and wiring distance constraints, the user can enjoy high quality music .

Bluetooth Connection:

Turn the speaker on by switching the power switch to 'ON' position. Followed by a tone,

the blue led light flashes quickly and the speaker's voice instructions has been activated

and it will tell you the speaker have been turned on and ready to use. The speaker now

has entered the Bluetooth pairing mode.

Connect to mobile phones/tablet PCs/computers:

1. Activate your phone's Bluetooth

2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices

3. Upon device found (BT-19S), click the device name and pair with it

4. If your phone ask for pairing code , please enter ”0000” and confirm

5. The speaker will have voice instructions to remind that pairing is successful.(Pairing

time is around 1 minutes which is varied by the devices)

6. After successful pairing, your speaker will sound a prompt tone and the power LED

lights blue.

Note: Memory function: It only need to pair both Bluetooth device for initial use. It will

remember the previous devices name and searching for last device and pair

automatically.

Handsfree function:

Speaker will have the voice instruction for incoming call.Short Press to answer the

call and talk to speaker directly.Short press

to end the call and back to play status.

Long press

to reject the incoming call.Long press to dial back the last dialed

phone no if no phone conversation.

Low power indication: Speaker will have voice instruction if battery is low( battery voltage

is below 3.3V). User need to charge the speaker timely.

AUX audio-in connector:

Summary of content (6 pages)

PAGE 1
User Guide Accessories: 1. Micro USB Cable ( for charging ) 2. 3.5mm Audio cable ( AUX-in cable ) 3. User Manual Highlights : BT19S is a compact Bluetooth speaker that can be wirelessly connected to Bluetooth devices such as smartphones, tablets and computers to playback any music collection stored on them. Thanks to its powerful battery, the system delivers full stereo sound, separate from any mains supply, for up to 4-7 hours and is the perfect companion for the park, whilst camping or on the beach.
PAGE 2
The speaker also features 1x AUX audio in port, simply connect the speaker with your non-bluetooth mobile phone/MP3 player/PC/laptop with the 3.5' jack audio cable, then you can play music via wired connection Charging and computer connection : Connect the micro USB charging cable to a computer or USB charger, red Led indication for charging status. Red LED goes off upon charging finished. (2~3 hours for charging time.) Specifications: Speaker Interfaces: Audio input connector: 3.
PAGE 3
Compliance with Bluetooth 2.1 Class II, support A2DP V1.2, AVRCP V1.4 profiles agreement. Transmission distance: up to 10 m (transmission distance may different according to environmental factors and other device's functional range) Support handsfree function. Maximum output power: 3W signal to noise ratio S / N: ≥ 80dB Frequency Range: 180Hz-20KHz Distortion THD: ≤ 1% speaker unit: outer diameter 40mm, inner magnet, 4 ohms, 3W Parameters of power: Rated voltage: 3.
PAGE 4
LED status: 1.Bluetooth status: blue light flashing 2. Line in mode: green light on 3. Charging status: red light on 4. Charging completed: red light off Trouble shootings: 1. My mobile phone can't find any new Bluetooth device? a) Make sure the bluetooth speaker has entered pairing mode; b) Ensure the speaker is within the effective working range; 2.
PAGE 5
a) Keep it dry and don’t take it to damp places to avoid the product’s internal circuit being affected. b) Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. c) Don’t expose the product to extremely cold area. It may damage the internal circuit board. d) Don’t try to disassemble the product as it may get damaged if you are not professional.
PAGE 6
authority to operate the equipment.