User's Manual

ManualsBrandsSHENZHEN WEIKING TECHNOLOGY ManualsAudio EquipmentBluetooth Speaker

BT27S Bluetooth Speaker

– User Manual

BT27S is a compact Bluetooth speaker that can be wirelessly connected to Bluetooth devices

such as smart phones, tablets and computers to playback any music collection stored on them.

Thanks to its powerful battery, the system delivers full stereo sound, x-BASS sound, separate

from any mains supply, for up to 3-6hours and is the perfect companion for the park, whilst

camping or on the beach. Process control, can get rid of complicated connections and wiring

distance constraints, the user can enjoy high quality music .

CONNECT TO BT27S Speaker

BT27S Speaker ANATOMY

BUTTONS



POWER SWITCH

Slide the ON/OFF switch to POWER ON the device until the power indicator lights up in green to turn on

BT27S

VOLUME CONTROLS

Press and Hold the PLUS “+” and MINUS “-“ buttons to Increase and Decrease volume.

Summary of content (7 pages)

PAGE 1
BT27S Bluetooth Speaker – User Manual BT27S is a compact Bluetooth speaker that can be wirelessly connected to Bluetooth devices such as smart phones, tablets and computers to playback any music collection stored on them. Thanks to its powerful battery, the system delivers full stereo sound, x-BASS sound, separate from any mains supply, for up to 3-6hours and is the perfect companion for the park, whilst camping or on the beach.
PAGE 2
MUSIC PLAY/ MUSIC PAUSE BUTTON Use this button to control music play or pause. CALL PICK UP/END BUTTON Use this button to answer or end a call. Press and Hold this button to make last call. 1. IMPORTANT SAFETY NOTE - Read, follow, and keep these instructions. - Pay attention to all warnings. - Do not use this device near water. - Clean only with a soft, dry cloth. - Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
PAGE 3
A full charge takes up to 4 hours. IF THE LED IS... FLASHING BLUE BT27S Speaker is trying to connect to your phone/device or Bluetooth® device. FLASHING RED Battery is low. Power up! BUTTONS ILLUMIATED BLUE BT27S Speaker is connected to your phone/device or Bluetooth® device. 3 GET CONNECTED CONNECTION OPTIONS Connect to BT27S Speaker wirelessly via Bluetooth® or via 3.5mm stereo input.
PAGE 4
2. Wait for the LED light to flash BLUE. You will hear a quick “To” tone and it is ready to pair. 3.3 PREPARE YOUR PHONE OR DEVICE Turn on Bluetooth®. ON AN IPHONE®, IPOD®, OR IPAD® Go to SETTINGS > enable BLUETOOTH ON ANDROID®, Go to SETTINGS > enable BLUETOOTH ON A BLACKBERRY® Go to SETTINGS/OPTIONS >BLUETOOTH and enable BLUETOOTH 3.4 MAKE THE CONNECTION Go to your device’s Bluetooth® settings. ADD, SEARCH or SCAN FOR DEVICES When “BT speakers” appears, select it.
PAGE 5
.1 ANSWER/END A CALL Press the PHONE CALL BUTTON on your BT27S Speaker to both answer and end a call. 5.2 DECLINE AN INCOMING CALL Press and Hold the PHONE CALL BUTTON for 2 seconds. 5.3 MAKE A CALL Use your phone to dial as usual. Listen and talk through your BT27S Speaker. TROUBLESHOOTING 1. HEARING DISTORTION A. Lower the volume on your BT27S Speaker and/or phone/device. (See section 4.1 GET THE BEST SOUND) B. Make sure it’s charged. Check for low battery, then chargeBT27S Speaker via USB. 2.
PAGE 6
•Do not expose your BT27S Speaker to liquid, moisture, humidity, or rain. Do not use the BT27S Speaker near a bathtub, sink, sauna, pool, or steam room. Exposure of the BT27S Speaker to moisture could result in electric shock. • Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects in to the BT27S Speaker. Such actions could result in electric shock. • Clean the BT27S Speaker only with a soft, dry cloth.
PAGE 7
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.