User's Manual

60.0 mm
90.0 mm
正面
反面
450.0 mm
TECHNICAL PARAMTERS
• Model: E200ML
• Speaker: Ø52mm 4Ω 6W*2
• Charging me: 3 hours
• Input: 5.0V 1.0A
• Product Weight: 450g
• Waterproof level: IPX7
PACKAGE INCLUDING
• 1pcs* E200ML wireless speaker • 1pcs* Product manual • 1pcs* Type-C USB cable
TWS CONNECTION
1: Turn on both speakers
2: Press and hold the Play/Pause-button on one of the speakers for about 2 seconds until you hear a
“beep”sound. The default is the primary speaker that you operated the Play/Pause-button of this
spaker for pairing initially.
3: Release play/Pause button. It can take a few more seconds before speakers connect to each other.
Check the indicator lights to distinguish L/R channel: The white light on one speaker is flashing white for
every 3 seconds that should be the left channel(the primary speaker); the white light on the other
speaker is solid white that should be the right channel
4: Go into the Bluetooth menu on your smartphone and pair the speakers with your phone by selecting the
speaker model number. (it will only display 1 number which is both combined in to one)
TWS DISCONNECTION
1. Press and hold the Play/Pause-buon on one of the speakers for about 2 seconds unl you hear
• Bluetooth: V5.0
• Built-in rechargeable baery: Li-on, 3.7V, 2200mAh
• Playing me: 6 hours
• Product Size: 77*81*191mm
• Range: Up to 10m
This product is designed with full aenon for safety performance. To ensure safe operaon, please follow
the following rules:
1. Place the speakers in a stable posion avoid fall and cause damage or personal injury.
2. Do not drop, disassemble, open, crush, bend, puncture, burn speaker.
3. Do not close to any heat source (such as radiators, heang equipment, stoves, or other heat-generang
equipment) where the use of speakers.
4. Please send professional maintenance staff to repair for any reason damage.
5. Before wiping with a dry cloth to clean the speakers, set the power switch to the off posion and unplug
the power cord from the power outlet.
6. Health consideraons, please adjust the sound to a suitable level.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operaon.
WARNING:
Changes or modificaons not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates uses and can radiate radio frequency
a “beep”sound
EXPLANATION
1. the symbol indicates: The product is only suitable for the safe non-tropical climates.
2. Note: Please use the same type or equivalent type of baery to replace if the baery is scrapped.
Otherwise maybe explosion occurs.
3. The lithium baery may not be exposed such as fire or excessive heat.
FAULT AND MAINTENANCE
First fault: connecon failed.
Soluon:
(1) Please check whether the mulfuncon indicator light flashes white. Please power on your speakers if
the light isn’t on. Please charge the speaker if the light is sll not on.
(2) Please turn off the other Bluetooth devices, if there are many Bluetooth devices surrounding. This may
result in search difficules.
(3) Restart wireless speaker on devices for Bluetooth search funcon.
Second problem: The music player appears sound breaks.
Soluon:
(1) View the distance between the player and the speaker has not been exceeded offecve Bluetooth
connecon distance 8-12meters.
(2) Ensure there is not any obstacle between the play device and speakers.
(3) Check the playback device or whether the speaker is in a low power state.
NOTES BEFORE USE
WATER
RESISTANT
RATING
IPX7
E200ML
User Manual
Outdoor Wireless Speaker
1
6
7
5
4
9
10
8
3
2
12
11
SAFETY INSTRUCTIONS
Read all instrucons
Only charge with devices rated and marked with 5V to avoid damage to the speaker.
Do not open up the speaker, it voids the warranty and may damage the product.
Rechargeable baeries have a limited number of charge cycles. Baery life and number of charge cycles
varies by use and sengs.
Never place the speaker close to high temperature heat sources.
To keep the warranty valid, never try to repair the product yourself.
PARTSAND FUNCTIONS
1. Lanyard
2. +: Volume up buon: next song, increase the volume.
3. -: Volume down buon: previous song, decrease the volume.
4. Bluetooth buon: switch the playing mode
5. Pause buon: play, pause, answer call, TWS.
6. Power buon: power on/off, RGB Light Control.
7. Baery level indicator.
8. TF card slot.
9. AUX IN port
10. Type-C charging port.
11. Microphone.
12. Bluetooth indicator.
THE SPEAKER’S BATTERY
A built-in rechargeable baery powers the speaker.
CHARGING
Connect the supplied charging cable to the charge input and to a USB port on your computer or to a USB
charger .The chargeing LED is lit white when charging ,and the 4 LED indicator will be solid white when
fully charged.it is recommended to charge 10 minutes before you power on the speaker if it does 7 days.
POWER ON/OFF
Power on: Long press power buon 3 seconds to power on the speaker, then the Bluetooth indicator
light is on and you can connect Bluetooth devices.
Power off: Long press power buon 3 seconds to power off the speaker, and then Bluetooth indicator
will turn off.
CONNECT THE SPEAKER
Turn on the speaker, the bluetooth indicator flashing white, on your device search for Bluetooth devices.
Select the speaker from the list. It will give an indicaon sound when the connecon is successful.
the bluetooth indicator solid white. Only one Bluetooth device can be connected at the same me.
If you want to connect another device to the speaker, then first disconnect the current one.
DISCONNECT THE SPEAKER
When it's connected via Bluetooth ,long press bluetooth buon 3 seconds to disconnect it .
RECONNECT THE SPEAKER
Some bluetooth devices support automac reconnecon;with those devices,the speaker will
automacally reconnect.
The speaker will not automacally reconnect to devices that do not support automac reconnecon.
When it's not connected ,long press bluetooth buon 3 seconds to connect to the last disconnected
device.
PLAYING MODE
Short press the bluetooth buon to switch between different playing mode BT or AUX, TF.
RGB LIGHT
Short Press power buon to control the RGB light ON and OFF.
Play Music: RGB lights flash with the rhythm of the music,
Pause: RGB light breathes slowly.
PLAY MUSIC USING MICRO SD CARD
Connect a micro SD card and power on the speaker.
AUDIO CABLE CONNECTION
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and your device.
The speaker is now connected to your device.
THE PAUSE BUTTON’S FUNCTIONALITY
Short Press: 1) Music playback status: play, pause funcon.
2) When there is an incoming call: answer the call.
3) When you’re receiving the call: hang up the phone call.
Long Press: 1) When you’re calling: Press 2 seconds to reject the call.
2) Press 2 seconds to enter TWS connecon, once connected,
press 2 seconds to disconnect TWS connecon.
Double press: When it’s connected via Bluetooth to your phone: to call back the last call.
CHANGE VOLUME AND SONG
When listening to music
Increase volume: Short press on the “+” buon.
Decrease volume: Short press on the “- “ buon.
Previous song: Long press on the “-” buon.
Next song: Long press on the “+” buon.
HANDS-FREE FUNCTIONALITY
1. Turn on the speaker and the bluetooth indicator will flash white .
2. Short press the pause buon to answer the call on the speaker, you can talk to each other through
the microphone hole, aer call ended, it will connue to play music.
3. Long press the pause buon on the speaker to reject an incoming call.
4. The bluetooth indicator will be solid white, only one bluetooth device can be connected at the
same me.
AUTOMATICALLY TURN OFF FUNCTIONALITY
The speaker will automacally turn off in 10 minutes when Bluetooth is not connected and no music
is playing.
energy and, if not installed and used in accordance with the instrucons, may cause harmful interference
to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon.
If this equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separaon between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiaon Exposure Statement:
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
TROUBLESHOOTING
The speaker does not turn on ?
Recharge your speaker.
The speaker does not turn off or does not respond ?
Reset your speaker. hold the power buon for 6 seconds to automacally reset the speaker and turn it off .
There is no sound?
Adjust the volume.
Make sure that your Bluetooth device is within range.
Ensure there is no obstacles in the way that can block/disturb the signal.
Check via the device’s Bluetooth connecon if the speaker is connected with the device.
There is poor sound quality?
Move the device closer to the speaker or try removing obstacles between them.
Cannot connect the device with the speaker?
Disconnect other connected devices and then try again.
You can force a disconnecon by moving out of Bluetooth range (10 m).
In order to avoid harming the product performance, please do charge your device each 3 months
at least.