User's Manual

4. Installing the DVR
Installation on the windshield
- Choose the installation location in advance, as the adhesive tape on the
mount is of single use.
- Degrease the mounting location and warm it up to ensure strong adhesion.
- Install the magnet holder into the device and turn the DVR on. When
evaluating the display image, make sure that the horizontal is kept and the lens
captures the image symmetrically both on the left and right. Then remove the
protective film from the surface of the adhesive tape and lean and press the
mount against the windshield.
Power connection
To power the device and charge the battery, use only the power adapter
included. Connect the power cable to the mount or DVR, then plug the charger
plug into the car’s cigarette lighter/socket.
When the car engine starts, the device turns on automatically.