User's Manual

1Bluetooth Menu
Turn on the bluetooth of the device you
wish to pair to, select “Jouirbuds Pro”
and follow the on-screen instructions.
Jouirbuds Pro
Charging the earbuds
Put the earbuds into the charging case
and close the lid, the charing case will
automatically charge the earbuds.
Charging the case
Please use a USB-C charger to charge
the case. The status LED will ligh up red
while charging and change to green when
charging is complete.
Bottom View
6
Limited Warranty
MOREJOY products are warranted against defects in
materials and craftsmenship for a period of one year
By defult from the date of the original purchase.
accordance with MOREJOY's user manuals. Under this
warranty, your claim can be made through place of
origional purchase.
During the warranty product, MOREJOY will, at it's sole
option, repair or replace the original ,defective parts or
issue a refund in the amount of the original purchase
price. This warranty does not include damage resulting
from accidents, or from improper use, maintenance, or
repair, or from causes that are not defects in materials
or craftmenship.
7KHZDUUDQW\WHUPGLHUVIURPRQHUHJLRQWRDQRWKHU
If you would like to verify the warranty term of the
product bought, please kindly contact:
info@morejoyinno.com
The information provided on this documents is for information only. MOREJOY seeks to
provide accurate and timely information, nevertheless, there may be inadvertent technical or
factual inaccuracies and typographical errors, for which we apologize. We reserve the right to
make changes and corrections at any time, without notice.
For full warranty details please visit www.morejoyinno.com
Initial Pairing
Button
1. Open Case Lid to activate pairing mode.
2. To change pairing devices, press and
hold button for 3 seconds and wait for LED
OLJKWDVKWRHQWHUSDLULQJPRGH
Jouirbuds Pro
True wireless headphones
MJ141 quick guide
www.morejoyinno.com
reless
headphones
MJ141
q
uick
g
uide
Control
(During phone call)
Double tap the touch Area at earbuds to answer
the call, double tap again to end the call
(When Listening the music)
Double tap the touch Area at earbuds to cycle
Play and Pause music.
Triple tap the Right touch Area for next track.
Triple tap the Left touch Area for previous track.
If you only wear one ear that triple tap is only for
next track
.
Touch Area
(When wearing both earbuds)
Press and hold 3 secs on right earbuds Touch
Area to cycle ANC, Transparency and normal
model.
Press and hold 3 secs on left earbuds to active
*Voice Assistant.
(When wearing single earbuds)
Press and hold 3 secs on each earbuds to active
*Voice Assistant.
*It depends on your phone feature.
Touch Area
B
ottom V
i
e
w
Active Noise Cancellation
*Depends on phone’s feature, please check your phone instruction.
Clear pairing information
Long press the charging case button
for 10 seconds
*Active voice assistant
Press and hold 3 secs on left
earbuds to active voice assistant.
Next / Previous
track
Triple tap the Right touch Area for
next track.
Triple tap the Left touch Area for
previous track.
If you only wear one ear that
triple tap is only for
next track
Power On
Take earbuds out of the charging
case
3RZHU2
Earbuds Charging
Pairing Mode
Answer a call
Play Music
ANC
Put earbuds into the charging case
and close the lid for 30s
Put earbuds into the charging case
and close the lid
Press the button on the charging
case for 3 seconds
Double-tap on any earbuds
Double-tap on any earbuds
Function Operational Instructions
Press and hold 3 secs on right
earbuds to cycle ANC modes.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
$Q\&KDQJHVRUPRGLFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
HTXLSPHQWRDQGRQWKHXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKH
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLHUHQWIURP
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
FCC ID 2AYBH-MJ141

Summary of content (1 pages)