User's Manual

14
4.1.2 Use separately
Please check if the Stimulator is fully charged before use. If necessary, please charge the unit; when charging, the main
unit display will indicate the icon.
During use, if you find that the electrical stimulation intensity is weak or the low-power icon appears on the main unit
display, please charge it in time; the main unit can be charged for about 3 hours, and it can be used for about 10 hours
after being fully charged; if the unit is not used, please shut down the host and storage it.
Note: Please use the charger supplied by our company to charge. When charging, please do not wear the unit.
4.1.2.1 Wear the Stimulator
Preparations: clean the covered area with a wet towel and keep the skin moist. If the hair is more, you can trim it.
Sit on a comfortable stool, relax the affected leg and bend naturally.
Place the Stimulator to correct position under the knee.
4.1.2.2 Power on and operate
Press and hold the switch/mode composite button for 2 seconds to turn the unit on; after power-on, the unit display
shows “XFT” LOGO for 2 seconds; tap this button to switch the working mode (gait mode and training mode
switching).
LOGO Gait mode Training Mode
When the Stimulator is in the pause state, press the “Electrical Stimulation Intensity Adjustment Button ” to
activate the electrical stimulation intensity; press the up button to increase the electrical stimulation, and press the
down button to decrease the electrical stimulation.
Note: In order to allow the skin area covered by the unit to be breathable and to prevent skin irritation and redness,
the unit should be suspended and removed at regular intervals to allow the skin to be fully breathable in the
process of using the product.
4.1.2.3 Power off
When the Stimulator is turned on, press and hold the switch/mode composite button for 2 seconds to turn off it.
4.1.3 Use with APP