User's Manual

21
Wave form Asymmetric biphasic balanced wave
Frequency
16-50Hz (±10%), respectively in 16、20、25、33、40、50Hz
Pulse Width
50-300μs (±10%), respectively in 100、150、200、250、300μs
Output intensity 0-90mA (±10% or ±2mA, whichever is greater, with 500Ω
load)
Dimension 419*103*13mm
8.3 Power Adapter
Dimension 71*41*31.5mm
Input AC100-240V, 50-60Hz, 0.3A
Output DC 5V, 1.2A
8.4 Working and storage environment
 Working Conditions:
Temperature 5~40°C,
Relative humidity ≤80% (Non-condensing)
Atmospheric pressure 86~106KPa
 Transport and Storage Conditions:
Temperature -20~55°C,
Relative humidity ≤93%(Non-condensing)
Atmospheric pressure 70~106KPa
 Production date: see the label
 Service life: 5 Years (battery is not included)
8.5 Accessories
Stimulator 1pc
Charging Cable 1pc
User manual 1pc
Power Adapter 1pc
9. Product classification
a) Classified by type of electric shock: internal power supply.
b) The application part is classified according to the degree of electric shock: BF type.
c) Classified by degree of protection against incoming liquid: IP66.
d) Classification according to the degree of safety when using flammable anesthetic gas mixed with air or flammable
anesthetic gas mixed with oxygen or nitrous oxide: no gas cylinder, non-AP and APG type equipment used in this
product.
e) Classified by operating mode: continuous operation.
f) Classified by voltage and frequency of the device: DC3.7V.
g) Whether the equipment has the application part of the protection against defibrillation discharge effect: This product
has no application part for the protection of defibrillation discharge effect, and there is a BF type application part
(referred to as a syringe, which is provided by the hospital) which is connected with the human body.
h) Whether the device has a signal output or input part: This product has no signal output or input part.
i) Permanent or non-permanent installation: This product is a non-permanent installation.
※Please handle this product in accordance with the national regulations on the handling of electronic products.