User's Guide

!
6. SSC Command Reference
7. SSC Command Reference
Here lists some common Wi-Fi commands for you to test the module.
7.1. op
Description
op commands are used to set and query the Wi-Fi mode of the system.
Example
op󰲧-Q󰲧
op󰲧-S󰲧-o󰲧wmode
Parameter
7.2. sta
Description
sta commands are used to scan the STA network interface, connect or disconnect AP, and
query the connecting status of STA network interface.
Example
sta󰲧-S󰲧[-s󰲧ssid]󰲧[-b󰲧bssid]󰲧[-n󰲧channel]󰲧[-h]
sta󰲧-Q
sta󰲧-C󰲧[-s󰲧ssid]󰲧[-p󰲧password]
sta󰲧-D
Parameter
Table 6-1. op Command Parameter
Parameter
Description
-Q
Query Wi-Fi mode.
-S
Set Wi-Fi mode.
wmode
There are 3 Wi-Fi modes:
• mode = 1: STA mode
• mode = 2: AP mode
• mode = 3: STA+AP mode
Table 6-2. sta Command Parameter
Parameter
Description
-S scan
Scan Access Points.
Xinyuan
! /129
2022.07