User's Guide

!
6. SSC Command Reference
7.3. ap
Description
ap commands are used to set the parameter of AP network interface.
Example
ap󰲧-S󰲧[-s󰲧ssid]󰲧[-p󰲧password]󰲧[-t󰲧encrypt]󰲧[-n󰲧channel]󰲧[-h]󰲧[-m󰲧max_sta]
ap󰲧–Q
ap󰲧–L
Parameter
7.4. mac
Description
mac commands are used to query the MAC address of the network interface.
Example
mac󰲧-Q󰲧[-o󰲧mode]
-s ssid
Scan or connect Access Points with the ssid.
-b bssid
Scan the Access Points with the bssid.
-n channel
Scan the channel.
-h
Show scan results with hidden ssid Access Points.
-Q
Show STA connect stutus.
-D
Disconnected with current Access Points.
Parameter
Description
Table 6-3. ap Command Parameter
Parameter
Description
-S
Set AP mode.
-s ssid
Set AP ssid.
-p password
Set AP password.
-t encrypt
Set AP encrypt mode.
-h
Hide ssid.
-m max_sta
Set AP max connections.
-Q
Show AP parameters.
-L
Show MAC Address and IP Address of the connected station.
Xinyuan
! /1210
2022.07