User's Manual

13 / 16
Security
(1) Frame Diagram
(2) Delay: Customize the countdown time when Alarm or Arm.
(3) Code:
1) User Code: Default user code is 1234.
2) System Code: Default system code is 9876.
3) Obfuscated Code: When entering the code, you can enter 5 to 8 digits of the obfuscated code, as
long as it contains the correct 4 digits in succession, it can be recognized as the correct code.
4) Password Validity Period: After selecting, you do not need to enter the password again within 2
minutes when the screen is on.
(4) Alarm:
Local Alarm: Select whether the panel emits an alarm sound.
Siren Alarm: Select whether the external signal emits an alarm sound
Siren Beep: Select whether the siren will beep when Arm/Disarm the panel.
Delay Beep: Choose whether to sound a beep when Arm or Alarm countdown.