User's Manual

3 / 16

II. Set up the Security Devices

2.1 Security Panel

Installation Diagram

(1) Wall Mount

(2) Placed on the Desktop

Security Panel×1 Wall Hanging Plate×1

Screws×2

1. Install the hanging

plate on the wall with

screws.

Note: The screws must

be all nailed to the wall,

and the hanging board

must be parallel.

2. Align the hole on the

back of the panel with the

hanging plate and install it.

Note: For concealed wire

installation, please remove

the bracket and cable clip.

Note:

1) Installed in the center of the home to facilitate signal reception and transmission.

2) Avoid installing all devices on metal surfaces, as well as on load-bearing walls.

Comes with a Stand on the Back

It can be directly placed on the

desktop, free from the installation

of holes on the wall, and can be

placed anywhere in the home.