User's Manual

5 / 16
Alarm Modes
A. Security Panel Alarm Modes
a. Away: The security panel is in a monitoring state, when the accessories are triggered, the security
panel will alarm.
b. Home: When the user is at home, in this mode, some areas can be monitored and alarms.
c. Disarm: The security panel cancels the monitoring state, and only the SOS button or the
accessories set to "Always" mode can trigger the alarm.
B. Accessories Modes：
a. Away/Home： When the security panel is in the "Away" or "Home" state, the panel will alarm after
the sensor is triggered. It is recommended that the outdoor sensor can be set to this mode.
b. Away： When the security panel is in the "Away" state, the panel will alarm after the sensor is
triggered. It is recommended that the outdoor detector can be set to this mode.
c. Always： Regardless of the state of the security panel, any time the sensor is triggered, the panel
will alarm. It is recommended to set this mode for gas leaks or smoke detectors, etc.
d. Disabled： The security panel will not respond to the alarm request of the sensor set in this mode.
Note:
You can choose which sensors are armed in Home and Away mode, or both, or always active.
For example, if you want to avoid triggering the alarm when you are at home, you can set the
specific sensor in Away mode. Then when you set the panel in “Home” state, the alarm will not be
triggered, only in “Away” state, the alarm will be triggered.