Safety Instructions

wake up the host, and the handle and host will automatically connect back.
Remarks: 1. Buttons that can wake up the handle: HOME key, A\B\Y\X, arrow keys,-key, + key, L1, R1 key, screenshot key.
2. The button that can wake up the host: HOME button.
3. Long press the HOME button for 10 seconds to turn off the handle.
2) Connect SWH host via USB cable:
On the main menu page of the SWH host, click Settings → Handle and sensor → Pro handle wired connection to turn on
the SWH host's Pro handle wired communication function; connect the handle to the USB port of the SWH host base with
a USB cable, and the connection is successful LED1 on the rear handle flashes slowly.
3) Connect to Windows computer via USB cable:
First, you need to download and install the X-360 driver to the Windows computer; then connect the handle to the
computer with a USB cable, and the four LEDs on the handle flash slowly; after the handle driver is automatically installed,
the corresponding LED on the handle flashes slowly, and the handle can be used . Support X-360 mode games. Please find
the download method of X-360 driver on the Internet.
Remarks: In X-360 mode with a wired connection to a computer, there is vibration function and no gyroscope axis
function.
4. Motor vibration adjustment function
Press Turbo and the "+" sign (about 3S) at the same time to increase the motor vibration, while holding down the TURBO
and "—" sign (about 3S) at the same time can make the motor vibration weaken; the motor vibration is divided into 4
levels, and the default is every time you turn on It is the maximum 100% level, and then the classification is carried out in
such a way as 100% (maximum) -70%-30%-0% (no vibration); this motor vibration intensity adjustment is only effective in
the SWH host.
5.Turbo and AUTO TURBO function
1. In any mode, press (first time) A/B/X/Y/L1/L2/R1/R2 to increase the cross key or Turbo key to set the Turbo function.
Press TURBO again (second time) to realize AUTO TURBO Function, press A/B/X/Y/L1/L2/R1/R2 alone again (third time).
Add the cross key and not the Turbo key to clear the Turbo function of a single key. In addition, press and hold the Turbo
key for more than 3S before pressing The minus key, clear the Turbo function of all keys.