XD2500 Mobile Payment Terminal User Guide 2871 Pullman Street, Santa Ana, CA 92705 Phone. 949.486.0320 Fax. 949.486.0333 www.exadigm.
XD2500 User Guide Copyright ExaDigm Company All Rights Reserved. Printed in USA Warranty The information contained in this document is subject to change without notice. ExaDigm makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose.
XD2500 User Guide Table of Contents 1.0 XD2500 Mobile Terminal ...................................................................................... 4 2.0 Accessories, Parts, Peripherals, and Modems ..................................................... 4 3.0 Installing the XD2500 ........................................................................................... 4 4.0 Terminal Components .......................................................................................... 5 4.
XD2500 User Guide 1.0 XD2500 Mobile Terminal The ExaDigm XD2500 Terminal supports multiple applications and will communicate with the host via Dial, Cellular Modem (CDMA) or (GPRS/GSM). PCI-PED Device information: Hardware version – The XD2500 features include: 2.0 Integrated Bar Code Reader Integrated Finger Print Reader Smart Card Reader Accessories, Parts, Peripherals, and Modems Shipped items include: 3.
XD2500 User Guide 4.0 Terminal Components 4.1 Front View 4.2 Terminal Ports The figure below shows the ports used to connect the terminal to a power source, telephone line and various devices such as PIN pads using the multi-port connector. © 2009 ExaDigm, Inc. Page 5 of 10 Rev.
XD2500 User Guide 5.0 Installing a Paper Roll A paper roll is required to print receipts and reports. Follow the steps below to install a paper roll: 1. Place forefinger under flap at top of printer compartment and pull forward using force. 2. Using tab lift compartment up. 3. Place the paper roll in the printer compartment. 4. Close the printer compartment door by pressing until it clicks into place. 6.
XD2500 User Guide 6. Once the gate is open, the SIM chip can be easily placed into the slot by inserting the card into the grooves of the holder door. The metallic contact on the SIM card must be placed face down (toward the contacts on the unit). 7. Close the door by pushing down and slide the gate up to lock it. 8.0 Card Swipe Swipe card through reader with the magnetic stripe facing down and away from the terminal screen. 9.
XD2500 User Guide GSM/GPRS Before you use the terminal to do live transactions with TCP/IP connections, you need to make sure the modem is activated by inserting the SIM card. Contact your network carrier, ISO or ExaDigm to confirm activation. 10.0 Connecting External Readers The multi-purpose USB port allows various devices to be attached and used. Attach the multi-purpose attachment to the R232 port located on the lower front side of the terminal. 11.
XD2500 User Guide 13.0 Terminal Indicators Indicators are located on the display screen and will display when the mentioned peripheral or device is attached. External Power Supply Battery 14.
XD2500 User Guide RF exposure information: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types XD2500 (FCC ID: XDQ2500EXA) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.228 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
