User's Manual
Table Of Contents
11
General function operation
Operator sign-in
Function
:
Sign-in means the operator start to use POS terminal, and to make sure it’s
valid.
Operation steps:
1、when start, system will prompt sign-in, and input operation ID number;
2、input operator ID number(0~30)and press enter;
3、input operator password and enter;
4、G3 will upload data to central host and ask for response, it shows “sign-in success” when
succeed; or else shows “sign-in failure”;;
5、enter main interface。
Sales
Function
:
cardholders make online transaction by credit cards at merchants’ place。
Operation steps
:
1、in main menu, choose “1, sales” to enter payment interface;
2、swipe card by instruction on device screen;
3、when default is consumption, the above two steps can be replaced as a shortcut to make
payments;
4、follow instruction, enter value amount and press enter;
5、Input password in Pin pad, no password, press enter directly;
6、Use G3 to make payment, screen shows payment success at last, and print receipt.
Void
Function
:
Transaction withdraws including transaction withdraw, pre-authorization
void and pre-authorization complete void, which are operated by
administrations sometimes are needed because of operation error and other
reasons.
Operation steps
:
1、in main menu, choose “2, void” and enter withdraw interface;
2、merchants administration input password and press enter;
3、follow instructions, input authorized number, press enter ;
4、swipe card by instruction, check whether card number is correct;
5、input password in pin pad, no password, press enter directly;