TWINS STEREO BLUETOOTH EARBUDS INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE
In the Box Bluetooth earphones × 2pcs Charging case × 1pcs Micro USB Charging cable × 1pcs Instruction Manual × 1pcs Eartips × 3 pairs Safety Instructions Read this manual carefully before putting the appliance into operation and keep this manual for future reference. Do not insert any metal object into the device. To avoid a static charge, do not use the device in an extremely dry climate. Do not attempt to repair the device yourself.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
5 Charging LED Indicator 6 Charging Case Power ON/OFF Switch 7 Charging Port Charging Instructions The Charging Case and Bluetooth Earbuds come with a built in rechargeable battery. Before using it for the first time we recommend you charge the battery fully. Only use the supplied USB cable for charging.
the USB cable. 2.Put the Bluetooth Earbuds into the charging slots correctly and securely. See that the terminals built in the earbuds and in the case, stay in contact. 3.Slide the Power ON/OFF Switch on the Charging Case to ON position, the LED light indicator built in on the earbuds turn red to indicate that the battery is being charged. It takes 1-2 hours for the Earbuds to fully charge. When the battery is fully charged, the LED light will turn blue.
LED flashes red and blue, then, short press the MF button on one unit twice to search and pair with the other unit. 2. .After successful pairing and connecting, the LED light indicator on the host Earbud will flash red and blue, and the subordinate Earbud will flash blue slowly 1 time per cycle. 3. At this point, activate the Bluetooth function on your mobile device, and search for Bluetooth devices near you. Your mobile device should show one of “BTH-159” instead of two in list, [This is the host Earbud.
slowly 1 time per cycle. Pairing the single earbud with Bluetooth devices (phone or music device) 1. Press and hold the MF button for about 7s to turn on the bluetooth earbuds.. When the LED flashes blue and red , the Bluetooth earphones is ready for pairing. 2. Turn on your Bluetooth enabled device and activate the Bluetooth function. Search for the Bluetooth device, “BTH-159” will show up. 3. Pair your Bluetooth enabled device with BTH-159. If a password is needed, type in “0000”.
Redial the last number: Press twice the MF button of the host earbud. Play or Pause: Click the MF button of the host earbud or subordinate earbud to control pause and play music. Note: Other functions including volume increase/decrease, next/previous track, you may need to control through your source device. Specifications Bluetooth version 4.
talk time approx 3 hrs Charging input power DC 5V Charging time Approx 1 hours Note: Battery life & charging time may vary, based on usage & types of devices used. FCC Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the product and receiver. ‐ Connect the product into an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
