User Manual

Enter in pairing mode
Be sure that the headphone is in power off status first, press and hold the MFB for 3-5 seconds,
until red and blue led blink alternately. Then release the MFB button, the unit is now in paring mode.
Pairing the headphone with Bluetooth® devices
Make the headphone enter into pairing mode (please refer to above section)
After searched, select ”OE-BTHS01” in the device list on the Bluetooth® device.
If a password is asked, enter the “0000” and press ”connect” (only some Bluetooth® devices will
ask for a password)
When the connection is successful, beep sound will be heard and the BLUE LED will flash quickly
for a few times while paired.
Please note pairing mode on the headphone will last for around 3 minutes. If no devices are paired
within around 3 minutes the headphone will automatically return to standby mode.
If pairing is unsuccessful, turn off the headphone first and then re-pair again following the above
steps.
Re-connecting to Bluetooth® devices
Every time the headphone is switched on, it will connect to the nearest and the last connected
device automatically .
When the headphone is in standby mode and doesn’t connect to any device, short press the MFB
button and it will connect to last connected device automatically.
LISTEN TO MUSIC
When the headphone is correctly paired with your Bluetooth® device, simply start to play music on
your device and you can enjoy the sound wirelessly in your headphone.
Volume up in music mode: Long press on volume ”+” key. You will hear a beep tone when the
maximum volume level is reached.
Volume down in music mode: Long press on volume ”-” key. You will hear a beep tone when the
minimum volume level is reached.
Go to next song of your playlist: Short press on the Next « + » key.
Go to previous song of your playlist: Short press on the Prev « + » key.
Play/Pause music: Short press on the MFB to pause the music. Short press again to play again.
HANDS-FREE FUNCTION
You can answer calls from your mobile phone when the headphone is paired with your mobile
phone. If you receive a call when listening to music, your music will pause automatically and you
will hear your telephone ring tone in the headphone.
Answer a call: Short press the multifunction button.
Reject a call : Press and hold the MFB button for 2 seconds until an indication tone is heard.
End a call: Short press the multifunction button.
Volume up in conversation mode: Long press on volume ”+” key. when the volume has reached
the maximum level, you will hear an indication tone.
Volume down in conversation mode: Long press on volume ”-” key, when the volume has reached
the minimum level, you will hear an indication tone.
Voice Dial : when connected to a device in standby mode, press and hold the MFB button for 2
seconds and release when your hear the indication tone.