Instruction Manual

INSTRUCTIONS FOR USE

Charging the speaker

For best results, fully charge the speaker before its first use.

1. Connect the USB charging cord (included) to the DC 5V charging port of the speaker and insert

the other end into a port on your computer or similar power source.

2. Red LED glows indicating that the battery is being charged. Once it is fully charged, the Red LED

will turn off. It will take around 2-3 hours to fully charge the battery.

Turn On/Off the Speaker with LED layers light

Slide the “Power” Switch to ON/OFF position to turn on/off the unit.

Turn the speaker to Bluetooth pairing mode -

1. Slide the “Power” Switch to ON position to turn on the unit.

2. You would hear an indication tone, and Blue LED indicator light will blink rapidly, your speaker is

now ON and is entering “pairing” mode.

(Note: Speaker automatically pairs with the previously paired devices.)

Pairing your device with Bluetooth Speaker –

Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth enabled device within the

distance of 26-33 Feet. Simply follow below steps.

1. Slide the “Power” Switch to ON position to turn on the unit.

2. You would hear an indication tone, and Blue LED indicator light will blink rapidly, your speaker is

now ON and is entering “pairing” mode.

3. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.

4. It will search for various devices.

5. The pairing name of our Bluetooth Speaker is “SL RAINBOW”, pair it with this device.

6. If required, enter the password ‘0000’ to confirm the finalized pairing.

7. Once paired successfully, you would hear an indication tone and the blue LED indicator light will

blink slowly.

8. If you fail to pair it within the time frame or you want to pair it with a new device please follows

the steps outlined above.

Select your favorite song on your Bluetooth device and the music should then stream through the

Bluetooth speaker.

Talking using the Bluetooth Speaker

Please ensure that your mobile phone is paired with the Bluetooth Speaker to use the below functions.

Function

Operation

Button

Answer Incoming Call

Incoming Call

Short press the Phone button to answer an incoming call.

End Call

Incoming Call

After your phone conversation, short press the Phone button

Volume Increase

During a call

Long push the Volume + to left will increase the volume

Volume Decrease

During a call

Long push the Volume - to right will decrease the volume