SOUND TOUCH LED TOUCH-CONTROLLED BLUETOOTH SPEAKER ITEM NO : TOUCH-SP INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1
Getting Started • • Remove the device from the box. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. Package Contents • • • • LED Touch Bluetooth Speaker USB Charging Cable 3.
Description of Parts: Item Function 1 LED indicator 2 Power / LED light button 3 PREV / Volume decrease (-) / Phone button 4 5 6 7 8 NEXT / Volume increase (+) Mode button Built-in Mic LED charge indicator 9 10 11 12 DC charging port USB slot Aux-in jack Micro SD (TF) slot Operation Blue light blinks on Bluetooth pairing mode, and stays on when Bluetooth paired successfully. To turn ON/OFF the speaker/To adjust warm white LED light brightness, or change different color light mode.
INSTRUCTIONS FOR USE Charging the speaker For best results, fully charge the speaker before its first use. 1. Connect the USB charging cord (included) to the DC 5V charging port of the speaker and insert the other end into a port on your computer or similar power source. 2. Red LED glows indicating that the battery is being charged. Once it is fully charged, the Red LED will turn off. It will take around 2-3 hours to fully charge the battery.
Select your favorite song on your Bluetooth device and the music should then stream through the Bluetooth speaker. Talking using the Bluetooth Speaker Please ensure that your mobile phone is paired with the Bluetooth Speaker to use the below functions.
▪ ▪ ▪ To Pause the Track – Short press the button. To Play the Track – Short press the button. Long press + to increase the volume or - to decrease the volume. (Note: When you insert USB flash drive into the USB slot or Micro SD (TF) card into the Micro SD (TF) card slot of the speaker accordingly, the Bluetooth of the speaker will turn off, automatically.) Play music using “Aux-In” Jack 1. Turn ON the device. 2. Insert the 3.5 mm Aux in cable (included) in the Aux-in jack of the speaker.
4. While it is on any color light mode, tap and hold the top of the speaker for about 2 seconds to change back to Warm White LED light mode. Do’s and Don’ts Do not play music at excessive levels. Damage to hearing and/or equipment may result. Do not use outdoors in excessive rain or extreme weather conditions. Specification Bluetooth version : 5.0 Speaker power : 5 Watts Unit Size : 3.73”x3.73”x7.26” Unit Weight : ~17.5 oz Run time (Music with LED light) : Up to 1.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
